Abstract:The uncertainty in local structure and time-variable compaction of ballast aggregates poses challenges in selecting suitable stabilization methods and parameters for ballast tracks in practical engineering, often resulting in suboptimal operational outcomes. To address this issue comprehensively, the spatial hybrid model of the double dynamic stabilisers-ballast track (MBD-DEM) is proposed in this paper. Subsequent numerical simulations of stabilisation operations are conducted to elucidate ballast vibration, migration behavior and the evolution of ballast track resistance under varying initial conditions of the ballast bed. Initially, leveraging multibody dynamics theory (MBD) and discrete element method (DEM), a MBD model of double stabilisers and a DEM ballast track model containing 6 sleepers were established respectively. Using the coupling interface, the real-time hybrid calculation of these two models is achieved through 6 sleepers in the middle of the ballast bed. Subsequently, the model's accuracy was validated by comparing test data from stabilisation vehicle operations on a Kunming Railway Bureau test line with simulation data from the dynamic double stabilisers-ballast track spatial hybrid model. Finally, utilizing the proposed hybrid model, the dynamic behavior, contact states, and movement rules of ballast particles during stabilisation operations on both loose and initially stable ballast beds (LBB and ISBB) were investigated at the mesoscopic scale. Concurrently, an in-depth analysis of lateral resistance changes in the ballast bed before and after the stabilisation operation is presented. The relevant findings effectively unveil the evolution of dynamic behavior in the ballast bed during stabilisation operations, concluding with practical suggestions for on-site operations. Simulation results illustrate that the rotation of ballast particles in the XY plane beneath each sleeper is predominantly characterized by harmonic rotation. With an increase in the depth of the ballast bed, the range of the rotation axis for combined angular velocity diminishes, leading to the phenomenon of rotation axis deflection. To ensure operational safety and efficiency, a minimum of two-times stabilization operations is recommended for loose ballast beds (LBB), with three-times operations considered optimal. For initially stable ballast beds (ISBB), one-time stabilization operation is basically sufficient.

Discrete Element Modeling of Full-Scale Ballasted Track Dynamic Responses from an Innovative High-Speed Rail Testing Facility

Dynamic Behavior Modeling of Full-Scale High-Speed Ballasted Track Using Discrete Element Method

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Advanced Full-Scale Laboratory Dynamic Load Testing of a Ballasted High-Speed Railway Track

Evaluation of Ballast Behavior under Different Tie Support Conditions using Discrete Element Modeling

Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement

Dynamic Responses and Associated Permanent Deformation of Ballasted Trackbed Due to Train Passages at High Speed

Toward Large-Scale Simulation of Railroad Dynamics: Coupled Train–Track–Discrete Element Method Model

Discrete Element Analysis of Geogrid-Stabilized Ballasted Tracks under High-Speed Train Moving Loads

Full-Scale Model Testing on A Ballastless High-Speed Railway under Simulated Train Moving Loads

Full-Scale Model Testing on Ballasted High-Speed Railway: Dynamic Responses and Accumulated Settlements

Experimental tests on dynamic behaviors of ballastless track of highspeed railway

Comparative Study on Dynamic Responses of Ballasted and Ballastless Tracks at Critical Velocity

Three-Dimensional Simulation of Track on Poroelastic Half-Space Vibrations Due to A Moving Point Load

Simulating Train Moving Loads in Physical Model Testing of Railway Infrastructure and Its Numerical Calibration

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Dynamic Response of Railways on Layered Half-Space Subjected to Moving Train Load

Coupled discrete-continuum approach for railway ballast track and subgrade macro-meso analysis

DYNAMIC RESPONSE ANALYSIS OF TRACK SYSTEM AND UNDERGROUND RAILWAY TUNNEL IN SATURATED SOIL SUBJECTED TO A MOVING TRAIN LOAD