Abstract:Ballast breakage under the long-term train load is a typical track disease source that would cause ballast bed hardening, ballast fouling, mud pumping and track settlement. However, the effect of ballast morphology on its breakage characteristics including breakage patterns and probabilities remains unclear to date. In this study, a series of uniaxial compression tests on 186 randomly selected ballast particles of different sizes and shapes was conducted. During each test, video and digital images were taken to capture the breakage processes and the morphological variation before and after breakage. Based on morphological analyses, it was found that the ballast could be mainly categorized into three types, i.e., cubic, flat, and elongated-flat types. According to the breakage appearance and force-displacement curves, four breakage modes were observed for the 186 sets of breakage tests and were defined with their breakage characteristics, i.e., splitting, explosive, edge breakage and edge abrasion. The explosive breakage exhibited higher strength than the splitting and edge breakage. As a special form of breakage, the edge abrasion presented the lowest strength. Regardless of ballast shape, the breakage strength of ballast decreased with the increase of particle size. Moreover, the strength of cubic ballast was higher than flat and elongated-flat ballast, especially for those with diameters ranging from 31 to 50 mm, indicating a notable shape impact. However, such effect on breakage decreased for other cases. It was also found that the strength survival probabilities of ballast with different shapes and breakage modes were all conformed to the Weibull distribution. With the deduced parameters, the individual probabilities causing the four breakages modes with known particle size and shape under arbitrary loads could be effectively predicted. These testing results and Weibull distribution parameters would be the benchmark for further clarification of breakage mechanism of ballast within trackbed and supply data base for Discrete Element Method-based researches.

A new DEM model to simulate the abrasion behavior of irregularly-shaped coarse granular aggregates

Quantification of Railway Ballast Degradation by Abrasion Testing and Computer-Aided Morphology Analysis

Effects of Particle Size and Grading on the Breakage of Railway Ballast: Laboratory Testing and Numerical Modeling

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Breakage Characteristics of Ballast Particle in Uniaxial Compression Tests Incorporating Shape and Size Effects

High-Cycle Computational Model for Accumulative Deformation of Granular Material under Repeated Traffic Loading

Performance of Ballast Influenced by Deformation and Degradation: Laboratory Testing and Numerical Modeling

Semiempirical Cyclic Densification Model for Ballast Incorporating Particle Breakage

Macro-and-micromechanical responses of ballast under triaxial shearing using coupled DEM–FDM with flexible and rigid membranes: a comparative study

Ballast crushing probability model considering the influence of particle morphology and size

Experimental studies on shape and size effects on particle breakage of railway ballast

Discrete Element Analysis of Shape Effect on the Shear Behaviors of Ballast

Hybrid Lattice-discrete element method for ballast modeling

Study on the Particle Breakage of Ballast Based on a GPU Accelerated Discrete Element Method

“Critical Particle Size” and Ballast Gradation Studied by Discrete Element Modeling

Modeling of the Particle Abrasion Process and a Discrete Element Method Study of Its Shape Effect

Direct Shear Properties of Railway Ballast Mixed with Tire Derived Aggregates: Experimental and Numerical Investigations

Ballast deterioration inspection and quantification with 3D form method based on particle inscribed ellipsoid

The discrete and continuum behaviour of railway ballast