Abstract:This article presents two field-scale crash tests of Streetscape Vehicle Anti-Ram barrier systems and LS-DYNA simulations to predict the global response of each system under vehicular impact. Tests 1 and 2 consisted of a five-post welded bus stop and a welded bollard, respectively; both were in a steel and concrete composite foundation embedded in compacted American Association of State Highway and Transportation Officials aggregate. Test 1 resulted in a P1 rating, where minimal foundation uplift and rotation were observed. Test 2 failed to result in a P1 rating, where significant foundation uplift, rotation, concrete cracking, and large deformation of surrounding soil were observed. For each test, two LS-DYNA models, namely, a finite element method–only model and a hybrid finite element method–smoothed particle hydrodynamics model, were created to predict the global response of the system. In the finite element method–only model, traditional finite element method approach was used for the entire soil region; in the hybrid finite element method–smoothed particle hydrodynamics model, the near-field soil region was modeled using the smoothed particle hydrodynamics approach, whereas the far-field soil region was modeled using the finite element method approach. For Test 1, both the finite element method–only model and the hybrid finite element method–smoothed particle hydrodynamics model were able to match the recorded global response of the system. For Test 2, however, the finite element method–only approach was not able to accurately predict the global response of the system; on the other hand, the hybrid finite element method–smoothed particle hydrodynamics approach was able to capture the global response including the bollard pullout, soil upheaval, and vehicle override. This research suggests that the hybrid finite element method–smoothed particle hydrodynamics approach is more appropriate in simulating the field performance of embedded structures under impact loading when large deformation of the surrounding soil is expected.

Field Test and Numerical Modeling of Vehicle Impact on a Boulder with Impact-Induced Fractures

Field Tests and Numerical Modeling of Vehicle Impacts on A Boulder Embedded in Compacted Fill

Test and Numerical Simulation of Truck Collision with Anti-Ram Bollards

Dynamic Analysis of Rockfall Impact on Bridges: Implications for Train Safety

Field-scale Testing and Numerical Investigation of Soil-Boulder Interaction under Vehicular Impact Using FEM and Coupled FEM-SPH Formulations

Tests for anti-ram bollards based on truck collision

Field Testing and Numerical Investigation of Streetscape Vehicular Anti-Ram Barriers under Vehicular Impact Using Fem-Only and Coupled Fem-Sph Simulations

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Impact Tests of Model RC Columns by an Equivalent Truck Frame

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

Dynamic Behaviors of Optimized K12 Anti-Ram Bollards.

Finite element modeling of impact between bus and roadside guardrail

Research on Dynamic Response and Fracture Properties of Metal Materials for Vehicle

Experimental evaluation of underride analysis techniques and empirical validation of a new analytical technique

Charpy Impact Testing Machine in Modeling of Vehicle Frontal Crash with Street Lights

Numerical study of mechanical response of shield tunnel under vehicle collision

Investigation on Damage and Failure Mechanisms of Roadway Surrounding Rock Triggered by Dynamic–Static Combined Loads

Cumulative Damage Study of Air-Dropped Vehicles with Multiple Drops Impact