Abstract:This article presents two field-scale crash tests of Streetscape Vehicle Anti-Ram barrier systems and LS-DYNA simulations to predict the global response of each system under vehicular impact. Tests 1 and 2 consisted of a five-post welded bus stop and a welded bollard, respectively; both were in a steel and concrete composite foundation embedded in compacted American Association of State Highway and Transportation Officials aggregate. Test 1 resulted in a P1 rating, where minimal foundation uplift and rotation were observed. Test 2 failed to result in a P1 rating, where significant foundation uplift, rotation, concrete cracking, and large deformation of surrounding soil were observed. For each test, two LS-DYNA models, namely, a finite element method–only model and a hybrid finite element method–smoothed particle hydrodynamics model, were created to predict the global response of the system. In the finite element method–only model, traditional finite element method approach was used for the entire soil region; in the hybrid finite element method–smoothed particle hydrodynamics model, the near-field soil region was modeled using the smoothed particle hydrodynamics approach, whereas the far-field soil region was modeled using the finite element method approach. For Test 1, both the finite element method–only model and the hybrid finite element method–smoothed particle hydrodynamics model were able to match the recorded global response of the system. For Test 2, however, the finite element method–only approach was not able to accurately predict the global response of the system; on the other hand, the hybrid finite element method–smoothed particle hydrodynamics approach was able to capture the global response including the bollard pullout, soil upheaval, and vehicle override. This research suggests that the hybrid finite element method–smoothed particle hydrodynamics approach is more appropriate in simulating the field performance of embedded structures under impact loading when large deformation of the surrounding soil is expected.

Tests for anti-ram bollards based on truck collision

Test and Numerical Simulation of Truck Collision with Anti-Ram Bollards

Impact Tests of Model RC Columns by an Equivalent Truck Frame

A comparison of the impact behavior of RC and CFT circular columns under lateral impact loading *

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Dynamic Behaviors of Optimized K12 Anti-Ram Bollards.

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Field Testing and Numerical Investigation of Streetscape Vehicular Anti-Ram Barriers under Vehicular Impact Using Fem-Only and Coupled Fem-Sph Simulations

Field Test and Numerical Modeling of Vehicle Impact on a Boulder with Impact-Induced Fractures

An experimental study on the impact resistance of a new three-wave beam steel guardrail

Numerical and Experimental Analysis to Develop a SB6/H3 High Containment Level Concrete Median Barrier

Field Tests and Numerical Modeling of Vehicle Impacts on A Boulder Embedded in Compacted Fill

Material Properties of Crushable Concrete for Use in Vehicle Anti-Ram Barriers

A numerical study of strong-post double-faced W-beam and Thrie-beam guardrails under impacts of vehicles of multiple size classes

Test and application of movable steel barrier with grade SB light composite corrugated beam

Scaled Model Test for Collision Between Over-Height Truck and Bridge Superstructure

Flexible device design and research on bend highway guardrail

Experimental and Numerical Investigation of Deformable Concrete Median Barrier

Impact resistance of bridge columns with energy-absorbing crash dampers under vehicle collisions

A Study On Injury Of Pedestrian Leg & Knee During Impaction To Bumper

Tests for Collision Between Over-High Trucks and Steel Bridge Superstructures