Abstract:Concrete-filled steel tubes (CFSTs), composed of an outer tube made of steel as the confining material and an inner concrete core, have been popularly utilised as high-rise building columns and urban bridge piers owing to their superior structural behaviour. Since the invention of CFSTs, their mechanical performance under static and seismic loading conditions have been extensively studied, while the investigation on their dynamic behaviour under impact loading is relatively limited. Of these limited studies about CFSTs under impact loading conditions, most experiments were completed using a drop-hammer testing facility or a pendulum-hammer testing device. Against this background, this study investigated six large CFSTs being impacted horizontally by a rigid vehicle to analysis their dynamic response. All specimens were vertically placed with the bottom pedestal fixed on the lab floor and the top end free. The main parameters of these CFSTs included the impact velocity (i.e., vi = 3.16–7.18 m/s), the CFST section size (i.e., D = 180–300 mm), as well as the CFST column height (i.e., hc = 1500–2100 mm). Test results revealed that, (1) all CFSTs experienced a bending-dominant failure when impacted horizontally by a rigid vehicle; (2) the impact velocity had a positive correlative trend with the peak impact force Fpeak and the peak lateral displacement δpeak of the CFST column; (3) a larger section size of the CFST column resulted in a higher flexural stiffness and a larger flexural capacity, thus leading to a higher Fpeak , a smaller time duration T and a smaller δpeak ; (4) the column height would affect the inertial response of the CFST column; a larger column height led to a larger Fpeak caused by the larger inertia effect of the CFST segment above the impact point. Finite-element model was established on the platform of LS-DYNA to simulate these CFSTs under horizontal impact loading, which was able to predict both impact force–time history curves and lateral displacement–time history curves with reasonably accuracy.

A comparison of the impact behavior of RC and CFT circular columns under lateral impact loading *

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Response of shear-deficient reinforced circular RC columns under lateral impact loading

Behaviour of CFT and CCFT columns under impact loads

Impact Behaviors of CFT and CFRP Confined CFT Stub Columns

Behavior Of Concrete Filled Tubes And Confined Concrete Filled Tubes Under High Speed Impact

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading

Impact Tests of Model RC Columns by an Equivalent Truck Frame

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

Dynamic Behaviour of Axially-Loaded RC Columns under Horizontal Impact Loading

Round-ended concrete-filled steel tube columns under impact loading: Test, numerical analysis and design method

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

Internal and external steel-tube strengthened RC columns: Impact tests and numerical simulations

Dynamic responses of concrete-filled steel tubes impacted horizontally by a rigid vehicle: Experimental study and numerical modelling

Responses of concrete-filled FRP tubular and concrete-filled FRP-steel double skin tubular columns under horizontal impact

Impact Behavior of Concrete-Filled Steel Tube with Cruciform Reinforcing Steel under Lateral Impact Load

Experimental Study of RC Columns and Composite Columns under Low-Velocity Impact

Dynamic behavior of concrete-filled steel tube cantilever columns stiffened with encased carbon fiber reinforced plastic profile subjected to lateral impact load