Abstract:Concrete-filled steel tubes (CFSTs), composed of an outer tube made of steel as the confining material and an inner concrete core, have been popularly utilised as high-rise building columns and urban bridge piers owing to their superior structural behaviour. Since the invention of CFSTs, their mechanical performance under static and seismic loading conditions have been extensively studied, while the investigation on their dynamic behaviour under impact loading is relatively limited. Of these limited studies about CFSTs under impact loading conditions, most experiments were completed using a drop-hammer testing facility or a pendulum-hammer testing device. Against this background, this study investigated six large CFSTs being impacted horizontally by a rigid vehicle to analysis their dynamic response. All specimens were vertically placed with the bottom pedestal fixed on the lab floor and the top end free. The main parameters of these CFSTs included the impact velocity (i.e., vi = 3.16–7.18 m/s), the CFST section size (i.e., D = 180–300 mm), as well as the CFST column height (i.e., hc = 1500–2100 mm). Test results revealed that, (1) all CFSTs experienced a bending-dominant failure when impacted horizontally by a rigid vehicle; (2) the impact velocity had a positive correlative trend with the peak impact force Fpeak and the peak lateral displacement δpeak of the CFST column; (3) a larger section size of the CFST column resulted in a higher flexural stiffness and a larger flexural capacity, thus leading to a higher Fpeak , a smaller time duration T and a smaller δpeak ; (4) the column height would affect the inertial response of the CFST column; a larger column height led to a larger Fpeak caused by the larger inertia effect of the CFST segment above the impact point. Finite-element model was established on the platform of LS-DYNA to simulate these CFSTs under horizontal impact loading, which was able to predict both impact force–time history curves and lateral displacement–time history curves with reasonably accuracy.

Responses of concrete-filled FRP tubular and concrete-filled FRP-steel double skin tubular columns under horizontal impact

A comparison of the impact behavior of RC and CFT circular columns under lateral impact loading *

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Impact Behaviors of CFT and CFRP Confined CFT Stub Columns

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

Behavior Of Concrete Filled Tubes And Confined Concrete Filled Tubes Under High Speed Impact

Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading

Test on residual ultimate strength of pultruded concrete-filled GFRP tubular short columns after lateral impact

Behaviour of CFT and CCFT columns under impact loads

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Mechanical Behavior of FRP Confined Steel Tubular Columns under Impact

Experimental and Analytical Responses of Hollow and Concrete-Filled Gfrp Tube Columns under Impact

FRP-concrete-steel Tubular Columns with a Large Inner Void under Lateral Impact Loading: Experimental Study and Finite-Element Modelling

Dynamic responses of concrete-filled steel tubes impacted horizontally by a rigid vehicle: Experimental study and numerical modelling

Dynamic behavior of concrete-filled steel tube cantilever columns stiffened with encased carbon fiber reinforced plastic profile subjected to lateral impact load

Behavior and modeling of large-scale concrete-filled FRP tubes with longitudinal steel rebars under lateral impact loading

Simplified impact force models for novel FRP-steel–concrete composite columns under axial impact loading

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Numerically efficient analysis of concrete-filled steel tubular columns under lateral impact loading

Impact Behavior of Concrete-Filled Steel Tube with Cruciform Reinforcing Steel under Lateral Impact Load

Performance evaluation and FRP strengthening of concrete-filled steel tubular columns subjected to vehicle impact