Abstract:Up to now, most studies corresponding to building structures against progressive collapse are based on the column-removal scenario. However, other cases, i.e., falling-debris impact scenario, which may cause progressive collapse of building structures were limitedly studied. This paper presents numerical simulations and a simplified approach of steel-framed subassemblies with Reverse Channel connection with Extended End Plate (RC-EEP) under the falling-debris impact scenario. The numerical results demonstrate the ductility, load-carrying capacity, and energy-absorption capacity of the steel-framed subassemblies with different Span-to-Depth Ratio under various impacted locations. All specimens showed the same global deformation profile and same load-resistance mechanism under the impact load on the same locations. Under mid-span-impact scenario, axial elongation of connection primarily affected the ductility. Both catenary action and flexural action affected the load-carrying capacity. Failure displacement, maximum load-carrying capacity and energy-absorption capacity all decreased with the increase of the Span-to-Depth ratio. Under beam-end-impact scenario, both the ductility and the load-carrying capacity were primarily controlled by the shear deformation and shear strength of the connection close to the impacted location. The increase of the Span-to-Depth ratio had little effect on failure displacement while slightly reduced the maximum load-carrying capacity and energy absorption capacity. Smaller Span-to-Depth Ratio was recommended in the impact-resisting design for impact load on both impact locations. A simplified approach was also developed to predict the behaviour of the steel frame subassemblies up to total failure. The validation study indicated that the proposed models can represent the key responses of steel-framed subassemblies with different Span-to-Depth Ratio subjected to impact load on various locations, including the flexural action at pure bending stage, the development of flexural action and catenary action at the tension-bending stage, and the failure stage. The accuracy of the proposed approach was validated against the experimental tests and numerical simulations, in the aspects of internal force-displacement relationships, load-carrying capacity-displacement relationships, and energy absorption-displacement relationships. The proposed approach provided an accurate and efficient way to predict the impact resistance of specimens with various Span-to-Depth Ratios under both of the mid-span impact and the beam-end impact scenarios.

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

Analysis of Collision Protection for Ocean and Offshore Structures

Impact Tests of Model RC Columns by an Equivalent Truck Frame

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Impact Behaviors of CFT and CFRP Confined CFT Stub Columns

Analytical P-Version Finite Elements and Application in Analyses of Structural Collision Protection

Impact Model Tests and Simplified Analysis for Flexible Pile-Supported Protective Structures Withstanding Vessel Collisions

Parametric studies of pile-supported protective structures subjected to barge impact using simplified models

Parametric analysis and simplified approach for steel-framed subassemblies with reverse channel connection under falling-debris impact

Analysis of cushion systems for impact protection design of bridges against overheight vehicle collision

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

Impact Analysis of Composite Sandwich I-Lam System

Impact resistance of bridge columns with energy-absorbing crash dampers under vehicle collisions

Design Method and Analysis of a Flexible Anti-collision Structure of Bridge Piers

Numerically efficient analysis of concrete-filled steel tubular columns under lateral impact loading

Study on the Performance of Energy Absorption Structure of Bridge Piers Against Vehicle Collision

Numerical Analysis of I-Lam Honeycomb Sandwich Panels for Collision Protection of Reinforced Concrete Beams

Numerical Simulation of the Dynamic Responses and Impact-Bearing Capacity of CFDST Columns under Lateral Impact

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Numerical Simulation on the Seismic Absorption Effect of the Cushion in Rigid-Pile Composite Foundation