Abstract:This study aims to provide important guidelines for the crashworthiness design of composite energy-absorbing structures, especially railway vehicles. An experimental and numerical investigation was carried out to explore the crushing response of circular composite tubes reinforced with plain woven carbon fiber-reinforced polymers (CFRP). Quasi-static and dynamic axial crushing tests were performed on CFRP tubes with an inner diameter of 100 mm and a nominal wall thickness of 12 mm. Experimental results showed that increasing loading velocity led to a 21.8% reduction in specific energy absorption (from 99.7 kJ/kg to 78.7 kJ/kg) but had negligible influence on failure modes. Finite element models were also established and validated against the experimental results using ABAQUS/Explicit software. The effects of several different parameters such as the number of shell layers, friction coefficient, and interface properties on the simulated results, were also investigated and analyzed. A small variation in these parameters could change the total energy absorption of CFRP tubes. The comparisons between the predicted and experimental results indicated that a finite element model with 10 shell layers could effectively replicate the crushing response. In addition, the simulated results indicated that the damage of tubal wall materials dominated the major energy-absorbing mechanisms of CFRP tubes under quasi-static loads, which was 69.1% of the total energy. The energy dissipated by friction effects between the loading platen and the crushed fronds was 24.1% of the total energy. The increase in the loading velocity led to a decrease in the composite damage energy except for friction energy, resulting in a decrease in the total energy absorption.

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Analysis of Collision Protection for Ocean and Offshore Structures

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Impact resistance of bridge columns with energy-absorbing crash dampers under vehicle collisions

Experimental and numerical studies on the energy absorption characteristics of Al/CFRP corrugated web beams

Experimental and Numerical Investigation of a Lattice Structure for Energy Absorption: Application to the Design of an Automotive Crash Absorber

Investigating the crash-box-structure's ability to absorb energy

Numerical analysis of reinforced concrete beams subjected to impact loads

Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

Crashworthiness analysis of shrink circular tube energy absorbers with anti-climbers under multiple loading cases

Experimental and numerical study on the dynamic response of steel-reinforced concrete composite members under lateral impact

Mechanical Behaviors of Composite Auxetic Structures under Quasi-Static Compression and Dynamic Impact

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Numerical Simulation on Impact Test of CFRP Strengthened Reinforced Concrete Beams

Optimization of Cellular Concrete Microstructure for Improved Impact Resistance

Kinetic response of reinforced concrete slabs to high-velocity projectile impact-robust numerical and statistical driven modeling techniques

New Analytical Calculation Models for Compressive Arch Action in Reinforced Concrete Structures