Abstract:Advances in Structural Engineering, Ahead of Print. Concrete-filled steel tubular (CFST) columns have been widely used in multi-story and high-rise frame structures. During the service period, they may suffer vehicle impact due to traffic accidents or terrorist attacks. This paper numerically evaluates the performance of CFST columns under vehicle impact and investigates the effects of carbon FRP (CFRP) wrapping arrangements on performance improvement of the columns. Before that, a numerical model was developed to simulate the responses of CFST columns without and with FRP wrapping under vehicle impact and post-impact axial compression, and then calibrated by reported tests. Evaluation results show that the performance of CSFT columns under vehicle impact is divided into five levels, i.e., no repair required, rapid repair required, minor repair needed, major repair needed, and replacement needed. The performance level decreases with the increase in the vehicle weight or speed and increases with the increase in the column diameter or steel tube thickness. The column height has little effects on the performance level. A higher axial load ratio, e.g., 0.5, might reduce the performance level. Besides, a CFST column tends to fail in flexure mode when hit by F800 medium truck, while it may fail in flexure & shear mode when hit by C2500 pickup truck. Investigation results indicate that FRP wrapping with each layer orientation of 90° (i.e., in the longitudinal direction) and 0° (i.e., in the hoop direction) present the best performance improvement for a CFST column possibly undergoing flexure & shear and flexure failure, respectively. The increase of the number of FRP layers effectively improves the performance levels of CFST columns but the excessive demand may be not economical. It is not necessary to employ an FRP wrapping range of 100% for improving the vehicular impact performance level of a CFST column to the expected one.

Vehicle Collision with Reinforced Concrete Columns Wrapped with Fiber-Reinforced Polymer Composites

Theoretical Model for Slender Frp-Confined Circular Rc Columns

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

Residual Performance of Frp-Retrofitted Rc Columns after Being Subjected to Cyclic Loading Damage

Time-Dependent Behavior of FRP Retrofitted RC Columns after Subjecting to Simulated Earthquake Loading

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Applications of Frp Composites in Concrete Columns

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

Numerical Analysis on Dynamic Response of CFRP-Wrapped RC Columns under Lateral Impact Loading

Performance evaluation and FRP strengthening of concrete-filled steel tubular columns subjected to vehicle impact

Finite element modeling of FRP retrofitted RC column against blast loading

Experimental Study on Shear Behavior of Reinforced-Concrete Members Fully Wrapped with Large Rupture-Strain Frp Composites

Experimental Investigation on Shear Strengthening of Corroded Reinforced Concrete Columns by Pet Fibers with Large Fracturing Strain

Experimental Study on the Impact of Using FRP Sheets on the Axial Compressive Performance of Short-Circular Composite Columns

Experimental and Analytical Responses of Hollow and Concrete-Filled Gfrp Tube Columns under Impact

Post-damage recovery of substandard RC columns by CFRPs

Fire Resistance of RC and FRP-confined RC Columns