Abstract:Deep high static loading roadway is extremely prone to rock burst under dynamic load disturbance. The “force-energy criterion” for the failure of surrounding rock in such deep roadways and the “energy criterion” for the rock burst was established by considering the stress and energy evolution characteristics of rock burst under this circumstance. Under the engineering background of the main roadway in No.1 mining area of Gaojiapu Coal Mine in Binchang Mining Area, Shaanxi Province, China, the partial stress field and distortion energy field of surrounding rock in the main roadway and the spatial-temporal evolution laws under dynamic load disturbance were simulated and analyzed by using a built-in dynamic module of FLAC3D. Results show that after the dynamic load disturbance, the partial stress and distortion energy are concentrated in the shallow part at two walls of the roadway in the early phase. With the continuous propagation of dynamic load stress wave, the partial stress and distortion energy are transferred to the deep part. The sudden high-energy release occurred in the peak zone of partial stress, leading to the plastic failure of coal and rock mass. Subsequently, the distortion energy was fully accumulated in the original plastic zone and transferred from shallow surrounding rocks to the deep surrounding rocks in the roadway, where the partial stress and distortion energy of coal and rock mass reached the yield conditions. Thus, the original plastic zone was sharply expanded, thereby forming a new plastic zone. The coal and rock mass experienced an approximately static failure when no residual energy (ΔU) was found in it. When ΔU > 0, the rock mass experienced dynamic failure, and ΔU was mainly the volume transformation energy, which is approximately one-half of the total elastic strain energy. ΔU was transformed into the initial kinetic energy of broken coal and rock mass. Thus, the coal and rock mass are burst out. In severe cases, this condition was manifested by the rock burst in the main roadway. An optimization scheme of prevention and control measures for rock burst was proposed on the basis of the above conclusions. The microseismic activity laws before and after the unloading were compared, and a good effect was achieved. The research results can lay a theoretical foundation for predicting and preventing rock bursts in coal mines by actively regulating the disaster-pregnant environment and mitigating the disaster-inducing conditions.

Investigation on Damage and Failure Mechanisms of Roadway Surrounding Rock Triggered by Dynamic–Static Combined Loads

Experimental Study of Dynamic Mechanical Response and Energy Dissipation of Rock Having a Circular Opening Under Impact Loading

Numerical Simulation of Mechanical Characteristics of Roadway Surrounding Rock under Dynamic and Static Loading

Dynamic response and constitutive model of damaged sandstone after triaxial impact

Dynamic Response and Damage Regularity of Sandstone with Different Moisture States under Cyclic Loading

Study on dynamic characteristics of sandstone-damaged by loading and unloading

Investigations of Damage Characteristics in Rock Material Subjected to the Joint Effect of Cyclic Loading and Impact

Experimental and Numerical Investigation on the Dynamic Failure Envelope and Cracking Mechanism of Precompressed Rock under Compression-Shear Loads

Study on Damage Characteristics and Physical Field Characteristics of Roadway Surrounding Rock Under Multiple Disturbances

Research on the Destructional Pattern of Surrounding Rock of Roadway Induced by Dynamic Disturbance

Dynamic Response and Energy Evolution of Sandstone Under Coupled Static–Dynamic Compression: Insights from Experimental Study into Deep Rock Engineering Applications

Dynamic compressive characteristics of a green sandstone under coupled hydraulic-mechanical loading: experiments and theoretical modeling

Dynamic Response Mechanism of Impact Instability Induced by Dynamic Load Disturbance to Surrounding Rock in High Static Loading Roadway

Experimental assessment on the dynamic mechanical response of rocks under cyclic coupled compression-shear loading

Research on Soft Rock Damage Softening Model and Roadway Deformation and Failure Characteristics

Study on Mechanical Properties and Control Technology of Surrounding Rock in the Fracture Zone of a Roadway

Dynamic tensile behaviour under impact loading for rocks damaged by static precompression

Experimental Study on Surrounding Rock Deformation and Acoustic Emission Characteristics of Rectangular Roadway under Different Loads

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Mechanical behaviors and failure characteristics of coal-rock combination under quasi-static and dynamic disturbance loading: a case based on a new equipment

Failure Mechanism of Anchored Roadway Surrounding Rocks under Near-Field Dynamic Disturbance