Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Mechanical property improvement of B4C ceramic hollow microspheres by doping carbon nanotubes at low-temperature

Densification and mechanical properties of boron carbide with micro-hole array by micro-powder injection molding

The improvement mechanism of mechanical properties of B4C ceramics by constructing core‐shell powders

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles

The Effect of CNTs on the Spark Plasma Sintering Densification Behavior and Mechanical Properties of B4C-Si Powders

Morphology Characteristics and Mechanical Properties of Hot-Pressed Micron/sub-Micron Boron Carbide Ceramics

Enhanced Mechanical Properties of Nanocrystalline B4C–SiC Composites by In-Situ High Pressure Reactive Sintering

The effect of transition metal carbides MeC (Me = Ti, Zr, Nb, Ta, and W) on mechanical properties of B4C ceramics fabricated via pressureless sintering

Study on the Thermophysical Properties of 80% 10B Enrichment of B4C

Effect of Ti Doping on the Mechanical Properties of B4C Composite Ceramics

Toughening mechanism of B4C/TiB2 ceramic materials by in situ reaction via spark plasma sintering

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Microstructure and Mechanical Properties of B4C - C Ceramic

Effect of B4C particle size and TiB2 content on the mechanical properties of B4C composites and their dynamic mechanical properties

Synthesis and Densification of Boron Carbide Nanowires

B4C‒TiB2 composite with modified microstructure and enhanced properties from optimal size coupling of raw powders

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

Twins Enhanced Mechanical Properties of Boron Carbide

Enhancing Superplasticity of Engineering Ceramics by Introducing BN Nanotubes