Abstract:Facing the apparent enhancement of rated power of offshore wind turbines, the increasing rotor diameter and blade length gradually pose severe challenges to its support structure for resisting extreme loads. Due to the remarkable composite effect, the recently developed tapered concrete-filled double skin steel tubular (CFDST) members can provide a high-performance structural type and competitive application prospect compared to traditional steel tower barrels. Therefore, this paper conducted the numerical and theoretical research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination. The finite element (FE) model was established to examine the full-range mechanism including torque versus deformation response ( T - θ curve), interaction behavior and component contribution, indicating that four characteristic points can distinguish the T - θ curve under pure torsion, and slight contact pressure between the inner tube and sandwich concrete exists along the height direction. The parametric study was performed to investigate the influences of geometric-physical parameters, e.g., by increasing tapered angle ( ψ ) 0.2°, the torsional capacity obtains a reduction of 5%; hollow ratios ( χ ), axial compression ratios, and diameter-to-thickness ( D / t ) ratios of double-skin tubes obviously affect the torsion resistance; altering steel yield grade influences torsional capacity than concrete grade. Subsequently, a theoretical multilayered cylinder model as the simplified design tool was proposed to simulate full-range T - θ curves of tapered CFDST members. Moreover, a modified design method for calculating N - T correlation curve was developed and validated by introducing the refined equations of pure torsion resistance ( T u ), where the design methods in current codes displayed a quite conservative prediction for tapered CFDST members with out-of-code parameters (e.g., hollow ratios or D / t ratios). The above research on out-of-code tapered CFDST members can offer valuable design guidelines for its engineering applications.

Numerical and analytical performance of tapered CFDST column under cyclic loading for wind turbine structures

Behaviour of tapered CFDST columns with large hollow ratio under combined loads

Coupled behaviour and strength prediction of tapered CFDST columns with large hollow ratios for wind turbine towers

Analytical behavior and bearing capacity research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Experimental study on Tapered Concrete-Filled Double Skin Steel Tubular columns under torsion

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Torsional Behaviour of Tapered CFDST Members with Large Void Ratio

Behaviour of Tapered Concrete-Filled Double Skin Steel Tubular (CFDST) Stub Columns

Ultimate Compressive Capacity of Tapered Concrete-Filled Double Skin Steel Tubular Stub Columns with Large Hollow Ratio

Axial compressive behaviour of tapered CFDST stub columns with large void ratio

Behavior and Calculation of Tapered Cfdst Columns under Eccentric Compression

Torsional behaviour of tapered concrete-filled double-skin steel tubular columns with large hollow ratios

Bending behavior and design of tapered lightweight CFDSST with large hollow ratio

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Analytical Behaviour of Tapered CFDST Stub Columns under Axially Partial Compression

Research on mechanical behaviour of tapered concrete-filled double skin steel tubular members with large hollow ratio subjected to bending

Compressive behaviour of tapered concrete-filled double skin steel tubular stub columns

Feasibility study of anti-strong-wind cable-tower structure

Torsional Ultimate Bearing Capacity of Centrifugal Concrete Filled Steel Tube Based on Model of Failure Line

Compressive behavior of CFDST columns: Effects of thin-walled inner steel tubes