Abstract:Tapered concrete-filled double-skin steel tubular columns with large hollow ratio (LHR-CFDST) have a good application potential in wind turbine towers, where they are commonly subjected to the combined action of compression, bending, shearing and torsion. Up to now, research work on the behaviour of tapered LHR-CFDST columns under combined loads is seldom reported and relevant experimental data are limited. This paper presents an experimental and numerical study on the tapered LHR-CFDST column under combined compression-bending-shear-torsion loads. Seven specimens with different parameters including the tapered angle, the hollow ratio, the torsion-to-bending ratio, the axial compression ratio and the height-to-diameter ratio were tested. The experimental results in terms of failure modes, load versus deformation relations and strain responses were discussed. Reliable finite element models were established to conduct numerical analysis in an extended parameter range. The mechanism of columns and the effects of torsion-to-bending ratios, axial compression ratios, height-to-diameter ratios, tapered angles, hollow ratios, diameter-to-thickness ratios of steel tubes and the material strength were revealed. The suitability of the existing ultimate capacity prediction method was evaluated for tapered LHR-CFDST columns. It is found that the failure mode of columns under compression-bending-shear-torsion loads is related to the torsion-to-bending ratio. The columns behave in a ductile manner under moderate axial compression. Tapered angle has a slight effect on the bending capacity of the column, whereas the capacity declines with the increase of hollow ratio and torsion-to-bending ratio. The existing method gives a conservative prediction for the ultimate capacity of tapered LHR-CFDST columns.

Axial compressive behaviour of tapered CFDST stub columns with large void ratio

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Axial compressive behaviour of CFDST stub columns with large void ratio

Compressive behaviour of tapered concrete-filled double skin steel tubular stub columns

Torsional Behaviour of Tapered CFDST Members with Large Void Ratio

Behaviour of tapered concrete-filled double-skin steel tubular columns with large hollow ratio under combined compression-bending-torsion loads: Experiments

Analytical Behaviour of Tapered CFDST Stub Columns under Axially Partial Compression

Behaviour of Tapered Concrete-Filled Double Skin Steel Tubular (CFDST) Stub Columns

Experiments on the Bearing Capacity of Tapered Concrete Filled Double Skin Steel Tubular (CFDST) Stub Columns

Behaviour of tapered CFDST columns with large hollow ratio under combined loads

Ultimate Compressive Capacity of Tapered Concrete-Filled Double Skin Steel Tubular Stub Columns with Large Hollow Ratio

Research on mechanical behaviour of tapered concrete-filled double skin steel tubular members with large hollow ratio subjected to bending

Experimental and Numerical Investigations on Concrete-Filled Double-Tubular Slender Columns under Axial and Eccentric Loading

Axial Compressive Behaviors of Multi-Cavity Concrete-Filled Double-Skin Tubular Stub Columns

Experimental and numerical investigations of square concrete-filled double steel tubular stub columns

Axial Compressive Behaviour of Concrete-Filled Double-Tube Stub Columns with Stiffeners

Study on the Behavior of Concrete-Filled Double-skin Thin-Walled Steel Tubular Stub Columns under Axial Compression

Axial Compression Behavior of Circular Concrete-Filled High-Strength Thin-Walled Steel Tubular Columns with Out-of-Code D/t Ratios

CFDST stub columns subjected to large deformation axial loading

Axial Compression Test and Numerical Investigation of Concrete-Filled Double-Skin Elliptical Tubular Short Columns