Behaviour of tapered CFDST columns with large hollow ratio under combined loads
Ran Deng,Xu-Hong Zhou,Yu-Hang Wang,Ke Ke,Jiu-Lin Bai,Rong-Hua Zhu
DOI: https://doi.org/10.1016/j.jcsr.2022.107388
IF: 4.349
2022-09-01
Journal of Constructional Steel Research
Abstract:Tapered concrete-filled double-skin steel tubular columns with large hollow ratio (LHR-CFDST) have a good application potential in wind turbine towers, where they are commonly subjected to the combined action of compression, bending, shearing and torsion. Up to now, research work on the behaviour of tapered LHR-CFDST columns under combined loads is seldom reported and relevant experimental data are limited. This paper presents an experimental and numerical study on the tapered LHR-CFDST column under combined compression-bending-shear-torsion loads. Seven specimens with different parameters including the tapered angle, the hollow ratio, the torsion-to-bending ratio, the axial compression ratio and the height-to-diameter ratio were tested. The experimental results in terms of failure modes, load versus deformation relations and strain responses were discussed. Reliable finite element models were established to conduct numerical analysis in an extended parameter range. The mechanism of columns and the effects of torsion-to-bending ratios, axial compression ratios, height-to-diameter ratios, tapered angles, hollow ratios, diameter-to-thickness ratios of steel tubes and the material strength were revealed. The suitability of the existing ultimate capacity prediction method was evaluated for tapered LHR-CFDST columns. It is found that the failure mode of columns under compression-bending-shear-torsion loads is related to the torsion-to-bending ratio. The columns behave in a ductile manner under moderate axial compression. Tapered angle has a slight effect on the bending capacity of the column, whereas the capacity declines with the increase of hollow ratio and torsion-to-bending ratio. The existing method gives a conservative prediction for the ultimate capacity of tapered LHR-CFDST columns.
construction & building technology,engineering, civil