Abstract:This paper explores the performance of concrete-filled double-skin (square stiffened hollow sections (SHS) outer and circular hollow sections (CHS) inner) steel tubular (CFDSST) stub columns under axial compression through experimental research and finite element analysis. The static axial compression experiments of six concrete-filled stiffened steel tubular (CFST) stub columns and fifteen CFDSST stub columns were conducted. The test method, process, phenomena and results are introduced in detail. The results indicated that compared with conventional CFST stub columns, CFDSST stub columns with reasonable hollow ratio can maintain load-carrying capacity, increase ductility and reduce self-weight. Increasing the strength of concrete is the most effective way to increase the load-carrying capacities of specimens when other variables remain constant. Finite element (FE) software was then utilised to generate the models of current specimens. The simulation results showed reasonableness and accuracy compared to the experimental results. Based on the validated models, parameter analysis was performed to reveal the influence of concrete strength, width-to-thickness ratio of the outer steel tube, stiffener depth, hollow ratio and yield strength of the outer steel tube on the ultimate strengths of the specimens. In addition, compared with test and FE strengths, the ultimate strengths predicted by available international codes were found to be quite conservative. Consequently, a formula was proposed to predict the load-carrying capacity of CFDSST stub columns considering the effective cross-sectional areas of the outer steel tubes and the strength of the confined concrete. The formula has been shown to provide the best prediction with acceptable reliability.

Inclined, Tapered and Sts Concrete-Filled Steel Tubular (cfst) Stub Columns under Axial Compression

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Behaviour of Inclined, Tapered and STS Square CFST Stub Columns Subjected to Axial Load

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Behavior and Design of Concrete-Filled Narrow Rectangular Steel Tubular (CFNRST) Stub Columns under Axial Compression

Experiments on Special-Shaped CFST Stub Columns under Axial Compression

Performance of steel-reinforced square CFST stub columns loaded in axial compression: Experiments

Concrete-filled Steel Tubes with Reinforcing Bars or Angles under Axial Tension

Circular Concrete-Encased Concrete-Filled Steel Tube (cfst) Stub Columns Subjected to Axial Compression

Experimental and numerical investigation of square concrete-filled double-skin steel stiffened tubular stub columns with CHS inner tubes under axial compression

Experiments on the Bearing Capacity of Tapered Concrete Filled Double Skin Steel Tubular (CFDST) Stub Columns

Analytical Behavior of CFDST Stub Columns with External Stainless Steel Tubes under Axial Compression

Behaviour of Tapered Concrete-Filled Double Skin Steel Tubular (CFDST) Stub Columns

Behaviour of Concrete-Filled Steel Tubular Stub Columns Subjected to Axially Local Compression

Concrete-filled steel tubes subjected to axial compression: Life-cycle based performance

Axial Compression Behaviour of Circular Concrete-Filled Stainless-Clad Bimetallic Steel Tubular Stub Columns

Compressive behaviour of tapered concrete-filled double skin steel tubular stub columns

Square concrete-filled stainless steel/carbon steel bimetallic tubular stub columns under axial compression

Experimental and Numerical Research on the Uniaxial Behavior of the Stiffened Circular Concrete-Filled Steel Tube Stub Columns

Analytical Behaviour of Tapered CFDST Stub Columns under Axially Partial Compression

Experimental and numerical investigation on the behaviour of square concrete-filled cold-formed double-skin steel stiffened tubular short columns