Abstract:Tapered concrete-filled double-skin steel tubular columns with large hollow ratio (LHR-CFDST) have a good application potential in wind turbine towers, where they are commonly subjected to the combined action of compression, bending, shearing and torsion. Up to now, research work on the behaviour of tapered LHR-CFDST columns under combined loads is seldom reported and relevant experimental data are limited. This paper presents an experimental and numerical study on the tapered LHR-CFDST column under combined compression-bending-shear-torsion loads. Seven specimens with different parameters including the tapered angle, the hollow ratio, the torsion-to-bending ratio, the axial compression ratio and the height-to-diameter ratio were tested. The experimental results in terms of failure modes, load versus deformation relations and strain responses were discussed. Reliable finite element models were established to conduct numerical analysis in an extended parameter range. The mechanism of columns and the effects of torsion-to-bending ratios, axial compression ratios, height-to-diameter ratios, tapered angles, hollow ratios, diameter-to-thickness ratios of steel tubes and the material strength were revealed. The suitability of the existing ultimate capacity prediction method was evaluated for tapered LHR-CFDST columns. It is found that the failure mode of columns under compression-bending-shear-torsion loads is related to the torsion-to-bending ratio. The columns behave in a ductile manner under moderate axial compression. Tapered angle has a slight effect on the bending capacity of the column, whereas the capacity declines with the increase of hollow ratio and torsion-to-bending ratio. The existing method gives a conservative prediction for the ultimate capacity of tapered LHR-CFDST columns.

Experimental behaviour of tapered CFST columns under combined compression and bending

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Experiments on the Bearing Capacity of Tapered Concrete Filled Double Skin Steel Tubular (CFDST) Stub Columns

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Experiments on Special-Shaped CFST Stub Columns under Axial Compression

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Concrete-encased CFST Columns under Combined Compression and Torsion: Experimental Investigation

Compressive behaviour of tapered concrete-filled double skin steel tubular stub columns

Behaviour of tapered CFDST columns with large hollow ratio under combined loads

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Experimental research on concrete filled steel tube columns under combined compression-bending-torsion cyclic load

Behaviour of concrete-encased CFST columns under combined compression and bending

Axial compressive behaviour of tapered CFDST stub columns with large void ratio

Analytical Behaviour of Tapered CFDST Stub Columns under Axially Partial Compression

Behaviour of Tapered Concrete-Filled Double Skin Steel Tubular (CFDST) Stub Columns

Behavior of concrete-filled T-shaped steel tubular beam-columns under biaxial compressive loads

Coupled bending-shear-torsion bearing capacity of concrete filled steel tube short columns

Behavior and Calculation of Tapered Cfdst Columns under Eccentric Compression

Inclined, Tapered and Sts Concrete-Filled Steel Tubular (cfst) Stub Columns under Axial Compression

Tests on elliptical concrete filled steel tubular (CFST) beams and columns

Experimental Study on Concrete Filled Steel Tubular Columns under Combined Compression, Flexure and Torsion