Abstract:Syngas production by the partial oxidation reforming of methane is a promising technology with a simple setup and quick dynamic response, which has great potential for application in small-scale fuel cells and portable power units. In this study, a catalytically enhanced porous media combustor for partial oxidation reforming is designed and tested. In the combustor, fuel-rich combustion in porous media and catalytic partial oxidation are integrated, benefitting from the merits of both technologies. Without external heat source, the combustor is directly ignited with a stoichiometric gas mixture during the cold startup process, and then adjusted to the partial oxidation conditions. Three zones, a preheating zone, an oxidation zone involving exothermic reactions, and a reforming zone involving endothermic reactions, are observed, which significantly affect the temperature profile in the axial direction. Considering both the methane conversion and reforming efficiency, the optimal equivalence ratio range for self-sustained operation is found to be 2.0-2.4. At an equivalence ratio of 2.0, the effect of the gas velocity on the temperature profile and gas composition of products are studied experimentally. At an equivalence ratio of 2.4 and a gas velocity of 0.13 m/s, the reforming efficiencies of the reactor reach 61.5% and 64.8% when 0.5 wt% Pd and 0.5 wt% Rh, respectively, are introduced to the second layer of the porous media. The carbon deposition at different axial positions of the reactor is analyzed, and the results indicate that carbon deposition by methane pyrolysis in the high-temperature oxidation zone is the dominating cause of carbon deposition. A re-ignition process at stoichiometric condition is helpful for the elimination of carbon.

Lean Biogas-Air Mixture Combustion on Porous Burner with a Flamethrower Ignition System

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Experimental investigation on flame stability and emissions of lean premixed methane–air combustion in a developed divergent porous burner

Experimental investigation on dynamic characteristics of methane/air combustion in double‐layer pellets porous media

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Porous medium burner for gas fuel

Stability of Lean Combustion in Mini-Scale Porous Media Combustor with Heat Recuperation

Impact of porous materials on the performance of a biogas porous burner

Lean premixed combustion of methane-air in a novel preheated miniature combustor with a flame holder and porous medium

Experimental Study of Biogas Combustion in A Two-Layer Packed Bed Burner

Experimental Study on Temperature Variation in a Porous Inert Media Burner for Premixed Methane Air Combustion

Experimental Study on the Combustion Characteristics of Ultralow-Concentration Methane in Divergent Porous Media Burner

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Experimental study on the premixed lean-burn in alumina particles based porous burner

Performance Evaluation of Low-Concentration Methane Combustion in a Four-Layer Gradually-Varied Porous Burner

Experimental study of industrial low nitrogen porous media burner

Premixed Combustion in A Porous Burner with Different Fuels

Stable lean co-combustion of ammonia/methane with air in a porous burner

Flame Propagation of Premixed Gas with Enhanced Heat Recirculation: Dynamic Characteristics of Lean and Rich Combustion

Combustion and thermal performance of a novel preheated miniature combustor with a flame holder and various porous medium materials

Syngas Production from CO 2 /CH 4 Rich Combustion in a Porous Media Burner: Experimental Characterization and Elementary Reaction Model