Abstract:When the shield tunnel passes through the watered stratum with high permeability, as the shield tail interspace prone to be filled with groundwater, resulting in the segregation and loss of ordinary grout slurry during synchronous grouting, then critically affect the physical and mechanical properties as well as the durability of the curing grouting ring. Hence, it is necessary to optimize the performance of the existing ordinary grouting slurry to improve its water-dispersion resistance on the premise of ensuring the original performance. By means of theoretical analysis and indoor tests, this paper systematically investigates the mechanism of water-dispersion resistance of synchronous grouting slurry in water-rich stratum with high permeability, establishing a set of testing process and detection method for water-dispersion resistance of synchronous grouting. Moreover, the influences of different flocculants with corresponding contents on the performance of synchronous grouting slurry have been revealed, and the evaluation criterion of water-dispersion resistance of synchronous grouting slurry in shield tunnel is also clarified. The results show that: 1) Turbidity has notable responses to the change of flocculant content, which could better reflect the clarity of water samples. So, the turbidity is considered as a main evaluation index of water-dispersion resistance of synchronous grouting; 2) On the other hand, pH and water-land strength ratio also demonstrates the acid-base changes of groundwater and the loss of cementitious materials respectively during grouting. Thus, the two indexes are applied as auxiliary evaluation indexes for water-dispersion resistance of synchronous grouting; 3) For the above evaluation indexes, corresponding critical values to satisfy the water-dispersion resistance of synchronous grouting slurry are ensured: turbidity < 100NTU, pH < 10, and water–air strength ratio at different curing ages greater than 80%.

Shield method tunnel synchronous grouting slurry applied to compound stratum with upper soft part and lower hard part

Case study of slurry shield driving parameters' influences on ground surface settlements

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Slurry Shield Tunnelling in Clayey Soils: Typical Problems and Countermeasures

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

CASE STUDY OF RELIEVING A SLURRY SHIELD?S CUTTER HEAD FROM BEING TRAPPED IN SILTY SAND LAYERS

Influences of grouting heave on overlying structures in shield tunneling

Case Study of Ground Surface Consolidation Settlements Induced by Slurry Shield Tunnelling

Monitoring and analysis of deformations and movements of slurry shield tunnel linings

Research on synchronous grouting mixing proportion of saturated sand stratum shield tunnel

Experimental Study on Fresh State Properties of Single-Liquid Semi-Inert Synchronous Grouting for Shield Tunnels in Water-Rich Sand Strata

Research and evaluation on Water-dispersion resistance of synchronous grouting slurry in shield tunnel

Study on the Floating of Large Diameter Underwater Shield Tunnel Caused by Synchronous Grouting

A computational method proposal on the determination of grouting parameters for shield construction in water-rich earth materials

Application of horizontal grouting method in receipt well of shield-driven tunnel

A literature review on properties and applications of grouts for shield tunnel

Study on the Reuse of Shield Mud from Clay Stratum in Synchronous Grouting Slurry

Application of geopolymer in synchronous grouting for reusing of the shield muck in silty clay layer

Experimental Study of High Performance Synchronous Grouting Materials Prepared with Clay

Reuse of Discharged Soil from Slurry Shield Tunnel Construction as Synchronous Grouting Material

Remediation of Damaged Shield Tunnel Using Grouting Technique: Serviceability Improvements and Prevention of Potential Risks