Abstract:Creep-fatigue interaction is identified as a primary failure mode for components operating under high temperatures. As operational durations extend, this interaction not only alters the material's microstructures but also initiates a gradual degradation in mechanical properties, significantly impacting its deformation and damage behaviors. In this work, the dynamic microstructural evolution of GH4169 superalloy during creep-fatigue was elucidated via qualitative characterization, and damage level evaluation method was subsequently developed by bridging microstructure degradation to mechanical property degradation. Creep-fatigue tests were performed at 650 °C with various tensile holding times and were interrupted at lifetime fractions of 10 %, 50 % and 80 % for further analysis and tensile evaluations. Results revealed that the prolonged exposure to holding times induced the coarsening of γ″ precipitates alongside an increase in low-angle grain boundaries, culminating a reduction in creep-fatigue strength. The development of voids and cracks exacerbated the degradation of elongation, leading to a hybrid fracture mode encompassing both intergranular and transgranular cracking paths. Synthesizing microstructural evolutions to qualitatively categorize diverse degradation levels imparted a robust physical basis for damage evaluation. A mapping model was established to correlate the average kernel average misorientation (micro-degradation indicator) with the tensile plastic strain energy density (macro-degradation indicator). The damage level evaluation method was endowed with quantitative metrics utilizing this model, and its generality was additionally validated in P92 steel. This work offers an insight into the quantitative damage evaluations of creep-fatigue-induced degradations in materials, thereby providing a theoretical basis for the development of operation management and inspection plans of components.

Experimental and Theoretical Investigations of High-Temperature Creep of the ENAW 5251 (AMg2) Aluminum Alloy under Step Loading

Description of step loads at high temperature creep of metallic materials

Experimental Investigation and Modeling of Damage Accumulation of EN-AW 2024 Aluminum Alloy under Creep Condition at Elevated Temperature

Experimental and theoretical study on high-temperature creep of VT6 titanium alloy under multi-axial loading conditions

Problem of long-term high temperature strength of metal materials

A new creep damage assessment method for metallic material under variable load conditions at elevated temperature

High Temperature Creep Behavior of Mg-6Al-1Zn-1.8Gd-0.9Y Alloy

Modeling Of Non-Stationary Creep Processes Under Multiple Loading Conditions By Taking Into Account Damage Accumulation In A Structural Material

High Temperature Creep Behavior of an As-Cast Near-Α Ti–6Al–4Sn–4Zr-0.8Mo–1Nb–1W-0.25Si Alloy

High temperature creep of precipitation-strengthened Ni3Al-based alloy

Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model

Enhancement of Creep Lifetime of Aluminum through Severe Plastic Deformation

Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening

Elevated-temperature Deformation Mechanisms in a CrMnFeCoNi High-Entropy Alloy

On the plastic strain accumulation in notched bars during high temperature creep dwell

Creep-fatigue Damage Level Evaluation Based on the Relationship Between Microstructural Evolution and Mechanical Property Degradation

Influence of anelastic recovery on the cyclic creep behavior of AlCoCrFeNi 2.1 eutectic high-entropy alloy

Study on the Creep Properties and Microstructures of EW75 Alloy

Influence of Anelastic Recovery on the Cyclic Creep Behavior of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Damage in Creep Aging Process of an Al-Zn-Mg-Cu Alloy: Experiments and Modeling

Creep Behavior and a Deformation Mechanism Based Creep Rate Model under High Temperature and Low Stress Condition for Single Crystal Superalloy DD5