Abstract:Nowadays, adhesively bonded joints constitute an emergent area, being applied in several industries, especially in the aviation sector. Research has been developed on the analysis of the mechanical behaviour of bonded joints, while establishing fracture characterisation in pure modes I and II, and in mixed-mode I + II. Despite of the significant developments in analysing of bonded joints under quasi-static and fatigue conditions, few studies have addressed other mechanical phenomena such as creep. On creep analysis, developments have been presented on damage modelling of metallic materials, including the use of cohesive zone modelling (CZM). This study presents an adaptation of the Kachanov-Rabotnov and Liu-Murakami damage models, including rheological parameters by using Maxwell, Voigt-Kelvin, and Burgers constitutive equations when creep loading is considered. Other stress degradation effects due to creep phenomena are also considered, incorporating power law and sin-hyperbolic based models. Twelve damage models are derived: Kachanov-Rabotnov-Maxwell (KRM), Kachanov-Rabotnov-Voigt-Kelvin (KRVK), Kachanov-Rabotnov-Burgers (KRB), Kachanov-Rabotnov-Maxwell-Sun (KRMS), Kachanov-Rabotnov-Voigt-Kelvin-Sun (KRVKS), Kachanov-Rabotnov-Burgers-Sun (KRBS), Liu-Murakami-Maxwell (LMM), Liu-Murakami-Voigt-Kelvin (LMVK), Liu-Murakami-Burgers (LMB), Liu-Murakami-Maxwell-Hyperbolic (LMMH), Liu-Murakami-Voigt-Kelvin-Hyperbolic (LMVKH), and Liu-Murakami-Burgers-Hyperbolic (LMBH). Resulting damage laws are appropriate for adhesives, but also for ductile polymers in general. The implementation of the derived laws in CZM was demonstrated, being capable of modelling primary, secondary, and tertiary creep phases under pure mode I loading. A parametric analysis was also performed, assessing the level of creep damage rate induced by each parameter and their effect on the creep curve shape. A theoretical basis was established in this study for further analysis of creep loaded adhesively bonded joints using CZM, where mixed-mode I + II can be considered in the future.

Modeling Of Non-Stationary Creep Processes Under Multiple Loading Conditions By Taking Into Account Damage Accumulation In A Structural Material

Experimental and theoretical study on high-temperature creep of VT6 titanium alloy under multi-axial loading conditions

Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening

Modeling of cyclic creep in the finite strain range using a nested multiplicative split

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Unified Viscoplastic Constitutive Model with Damage for Multi-Axial Creep–fatigue Loading

Creep damage model of rock mass under multi-level creep load based on spatio-temporal evolution of deformation modulus

Influence of the process of damage accumulation on the asymptotic behavior of stress fields under creep conditions of a sample with a central crack

A constitutive model considering creep damage of wood

New Model for Creep Damage Analysis and Its Application to Creep Crack Growth Simulations

A novel nonlinear fractional viscoelastic–viscoplastic damage creep model for rock-like geomaterials

An integrated unified elasto-viscoplastic fatigue and creep damage model with characterization method for structural analysis of nickel-based high-temperature structure

EFFECT OF DAMAGE ACCUMULATION ON THE ASYMPTOTIC BEHAVIOR OF STRESSES AHEAD THE CRACK TIP

On multiaxial creep–fatigue considering the non-proportional loading effect: Constitutive modeling, deformation mechanism, and life prediction

An extended gradient-enhanced damage-plasticity model for concrete considering nonlinear creep and failure due to creep

Creep Damage Characterization Using Nonlinear Ultrasonic Guided Wave Method: A Mesoscale Model

Description of step loads at high temperature creep of metallic materials

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

Enhanced Fatigue Damage under Cyclic Thermo-Mechanical Loading at High Temperature by Structural Creep Recovery Mechanism

Viscoelastic–Plastic Constitutive Model Considering the Damage Characteristics of Concrete in the Process of Nonlinear Creep

Creep damage laws for bonded joints under pure mode I loading