Abstract:Nowadays, adhesively bonded joints constitute an emergent area, being applied in several industries, especially in the aviation sector. Research has been developed on the analysis of the mechanical behaviour of bonded joints, while establishing fracture characterisation in pure modes I and II, and in mixed-mode I + II. Despite of the significant developments in analysing of bonded joints under quasi-static and fatigue conditions, few studies have addressed other mechanical phenomena such as creep. On creep analysis, developments have been presented on damage modelling of metallic materials, including the use of cohesive zone modelling (CZM). This study presents an adaptation of the Kachanov-Rabotnov and Liu-Murakami damage models, including rheological parameters by using Maxwell, Voigt-Kelvin, and Burgers constitutive equations when creep loading is considered. Other stress degradation effects due to creep phenomena are also considered, incorporating power law and sin-hyperbolic based models. Twelve damage models are derived: Kachanov-Rabotnov-Maxwell (KRM), Kachanov-Rabotnov-Voigt-Kelvin (KRVK), Kachanov-Rabotnov-Burgers (KRB), Kachanov-Rabotnov-Maxwell-Sun (KRMS), Kachanov-Rabotnov-Voigt-Kelvin-Sun (KRVKS), Kachanov-Rabotnov-Burgers-Sun (KRBS), Liu-Murakami-Maxwell (LMM), Liu-Murakami-Voigt-Kelvin (LMVK), Liu-Murakami-Burgers (LMB), Liu-Murakami-Maxwell-Hyperbolic (LMMH), Liu-Murakami-Voigt-Kelvin-Hyperbolic (LMVKH), and Liu-Murakami-Burgers-Hyperbolic (LMBH). Resulting damage laws are appropriate for adhesives, but also for ductile polymers in general. The implementation of the derived laws in CZM was demonstrated, being capable of modelling primary, secondary, and tertiary creep phases under pure mode I loading. A parametric analysis was also performed, assessing the level of creep damage rate induced by each parameter and their effect on the creep curve shape. A theoretical basis was established in this study for further analysis of creep loaded adhesively bonded joints using CZM, where mixed-mode I + II can be considered in the future.

Creep damage laws for bonded joints under pure mode I loading

Creep Damage Laws for Bonded Joints under Pure Mode II Loading

Analysis of creep crack growth in bonded joints based on a Paris' law-like approach

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening

New Model for Creep Damage Analysis and Its Application to Creep Crack Growth Simulations

Estimation of CZM Parameters for Investigating the Interface Fracture of Adhesively Bonded Joints Under Mode I, Mode II, and Mixed‐Mode (I/II) Loading

Modeling Of Non-Stationary Creep Processes Under Multiple Loading Conditions By Taking Into Account Damage Accumulation In A Structural Material

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Effects of creep on interfacial stresses of bonded structures

Modeling of cyclic creep in the finite strain range using a nested multiplicative split

The development of creep damage constitutive equations for high Cr steel

Estimation of fracture behavior of CFRP/CFRP adhesively bonded joints under mixed-mode conditions using a cohesive zone model

Damaged creep constitutive models of rock-like materials containing multiple flaws and their relationships to those of the intact materials

Creep damage model of rock mass under multi-level creep load based on spatio-temporal evolution of deformation modulus

Creep damage model considering unilateral effect based on bimodulus theory

A rate-dependent cohesive zone model with the effects of interfacial viscoelasticity and progressive damage

Effect of strain-rate and moisture content on the mechanical properties of adhesively bonded joints

Fracture Analysis of Highly Flexible Adhesives: Cohesive Zone Modelling across a Wide Spectrum of Temperatures and Strain Rates

A Continuum Damage Mechanics-Based Viscoplastic Model of Adapted Complexity for High-Temperature Creep–Fatigue Loading