Abstract:In this manuscript, a rate-sensitive plasticity-based damage model for concrete subjected to dynamic loads is presented. The developed rate-sensitive damage model incorporates the key experimental evidence related to strain rate and damage rate. With increasing strain rates, the model is able to predict a decrease in the rate of damage evolution due to artificial stiffening effects together with a final higher level of damage. The major contribution of the work is to include the effect of damage rate, strain rate and also to consider all the physical mechanisms of damage. This is achieved by using a power law model to relate the rate of damage to the equivalent plastic strain rate. The damage parameter considers hydrostatic, tension and compression damage. Such a damage definition helps in the prediction of pulverized damage due to a loss in cohesive strength at increased hydrostatic stress, shear-induced compressive damage and tensile microcracking. Strong volumetric deformation of the material that includes hydrostatic and compaction damage is also considered in the model. Because hydrostatic damage accounts for the reduction in stiffness and compaction damage accounts for the increase in stiffness under pure compressive loading. A strain rate-dependent failure surface is considered and with increasing strain rate there is an increase in the size of the failure surface which is capped at an upper limiting value. The incremental effective stress-strain relationship is defined in terms of rate of damage, accumulated damage and viscosity parameters reflecting the inherent inertial, thermal and viscous mechanisms respectively. The stress-strain relationship in the model also accounts for stress reversals that occur due to interference of an incident and reflected wave, by including a Heaviside function. The developed model is implemented in LS-DYNA using vectorized UMAT. Verification, validation and parameterization of the developed model have been made through several numerical analyses.

An extended gradient-enhanced damage-plasticity model for concrete considering nonlinear creep and failure due to creep

Coupled Creep-Damage-Plasticity Model for Concrete under Long-Term Loading

Numerical modeling of delayed damage and failure of concrete structures under sustained loading

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Viscoelastic–Plastic Constitutive Model Considering the Damage Characteristics of Concrete in the Process of Nonlinear Creep

Numerical Method for Creep Analysis of Strengthened Fatigue-Damaged Concrete Beams

A damage-plasticity model for the dynamic failure of concrete

Localizing gradient damage model coupled to extended microprestress-solidification theory for long-term nonlinear time-dependent behaviors of concrete structures

Nonlinear Creep Damage Constitutive Model of Concrete Based on Fractional Calculus Theory

On a damage-plasticity approach to model concrete failure

A macroscopic gradient-enhanced damage model for deformation behavior of concrete under cyclic loadings

Plastic-Damage Model for Cyclic Loading of Concrete Structures

An implicit stress update algorithm for the plastic nonlocal damage model of concrete

CDPM2: A damage-plasticity approach to modelling the failure of concrete

A fracture energy–based viscoelastic–viscoplastic–anisotropic damage model for rate-dependent cracking of concrete

Creep Characterization of Concrete Suffering Initial Damage

An improved damage-plasticity material model for concrete subjected to dynamic loading

Rate sensitive plasticity-based damage model for concrete under dynamic loading

Constitutive model of concrete creep damage considering the deterioration of creep parameters

Numerical analysis of damage and failure behavior of concrete

A novel nonlinear fractional viscoelastic–viscoplastic damage creep model for rock-like geomaterials