Abstract:In this manuscript, a rate-sensitive plasticity-based damage model for concrete subjected to dynamic loads is presented. The developed rate-sensitive damage model incorporates the key experimental evidence related to strain rate and damage rate. With increasing strain rates, the model is able to predict a decrease in the rate of damage evolution due to artificial stiffening effects together with a final higher level of damage. The major contribution of the work is to include the effect of damage rate, strain rate and also to consider all the physical mechanisms of damage. This is achieved by using a power law model to relate the rate of damage to the equivalent plastic strain rate. The damage parameter considers hydrostatic, tension and compression damage. Such a damage definition helps in the prediction of pulverized damage due to a loss in cohesive strength at increased hydrostatic stress, shear-induced compressive damage and tensile microcracking. Strong volumetric deformation of the material that includes hydrostatic and compaction damage is also considered in the model. Because hydrostatic damage accounts for the reduction in stiffness and compaction damage accounts for the increase in stiffness under pure compressive loading. A strain rate-dependent failure surface is considered and with increasing strain rate there is an increase in the size of the failure surface which is capped at an upper limiting value. The incremental effective stress-strain relationship is defined in terms of rate of damage, accumulated damage and viscosity parameters reflecting the inherent inertial, thermal and viscous mechanisms respectively. The stress-strain relationship in the model also accounts for stress reversals that occur due to interference of an incident and reflected wave, by including a Heaviside function. The developed model is implemented in LS-DYNA using vectorized UMAT. Verification, validation and parameterization of the developed model have been made through several numerical analyses.

Coupled Creep-Damage-Plasticity Model for Concrete under Long-Term Loading

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Numerical modeling of delayed damage and failure of concrete structures under sustained loading

A Coupled Plastic Damage Model for Concrete considering the Effect of Damage on Plastic Flow

An extended gradient-enhanced damage-plasticity model for concrete considering nonlinear creep and failure due to creep

Viscoelastic–Plastic Constitutive Model Considering the Damage Characteristics of Concrete in the Process of Nonlinear Creep

Plastic-Damage Model for Cyclic Loading of Concrete Structures

Numerical Method for Creep Analysis of Strengthened Fatigue-Damaged Concrete Beams

Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening

An improved damage-plasticity material model for concrete subjected to dynamic loading

A Damage Model of Concrete including Hysteretic Effect under Cyclic Loading

A damage-plasticity model for the dynamic failure of concrete

Localizing gradient damage model coupled to extended microprestress-solidification theory for long-term nonlinear time-dependent behaviors of concrete structures

Creep Characterization of Concrete Suffering Initial Damage

Constitutive model of concrete creep damage considering the deterioration of creep parameters

An enhanced damage plasticity model for predicting the cyclic behavior of plain concrete under multiaxial loading conditions

An elastoplastic damage model of concrete under cyclic loading and its numerical implementation

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Rate sensitive plasticity-based damage model for concrete under dynamic loading

An implicit stress update algorithm for the plastic nonlocal damage model of concrete

A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads