Abstract:In this manuscript, a rate-sensitive plasticity-based damage model for concrete subjected to dynamic loads is presented. The developed rate-sensitive damage model incorporates the key experimental evidence related to strain rate and damage rate. With increasing strain rates, the model is able to predict a decrease in the rate of damage evolution due to artificial stiffening effects together with a final higher level of damage. The major contribution of the work is to include the effect of damage rate, strain rate and also to consider all the physical mechanisms of damage. This is achieved by using a power law model to relate the rate of damage to the equivalent plastic strain rate. The damage parameter considers hydrostatic, tension and compression damage. Such a damage definition helps in the prediction of pulverized damage due to a loss in cohesive strength at increased hydrostatic stress, shear-induced compressive damage and tensile microcracking. Strong volumetric deformation of the material that includes hydrostatic and compaction damage is also considered in the model. Because hydrostatic damage accounts for the reduction in stiffness and compaction damage accounts for the increase in stiffness under pure compressive loading. A strain rate-dependent failure surface is considered and with increasing strain rate there is an increase in the size of the failure surface which is capped at an upper limiting value. The incremental effective stress-strain relationship is defined in terms of rate of damage, accumulated damage and viscosity parameters reflecting the inherent inertial, thermal and viscous mechanisms respectively. The stress-strain relationship in the model also accounts for stress reversals that occur due to interference of an incident and reflected wave, by including a Heaviside function. The developed model is implemented in LS-DYNA using vectorized UMAT. Verification, validation and parameterization of the developed model have been made through several numerical analyses.

A damage-plasticity model for the dynamic failure of concrete

CDPM2: A damage-plasticity approach to modelling the failure of concrete

On a damage-plasticity approach to model concrete failure

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A Unified Dynamic Model For Concrete Considering Viscoplasticity And Rate-Dependent Damage

Endochronic Plasticity Theory-Based Dynamic Damage Constitutive Model Development of Concrete Materials

A plastic-damage model for concrete

A VISCOPLASTIC DAMAGE CONSTITUTIVE MODEL FOR CONCRETE

A Elastic Plastic Viscous-Damage Model For Concrete Considering Strain Rate Effect And Application

A Competitive Mechanism Driven Damage-Plasticity Model For Fatigue Behavior Of Concrete

Plastic-Damage Model for Cyclic Loading of Concrete Structures

Rate sensitive plasticity-based damage model for concrete under dynamic loading

Dynamic viscous-damage constitutive model for concrete

An Energy Release Rate-Based Plastic-Damage Model for Concrete

Damage-plasticity Modeling of Shear Failure in Reinforced Concrete Structures

A Practical Elastic Plastic Damage Model for Concrete

A Coupled Plastic Damage Model for Concrete considering the Effect of Damage on Plastic Flow

Dynamic Mechanical Behavior and the Constitutive Model of Concrete Subjected to Impact Loadings

A NEW ENERGY-BASED ELASTOPLASTIC DAMAGE MODEL FOR CONCRETE

A unified plastic-damage model for concrete and its applications

An extended gradient-enhanced damage-plasticity model for concrete considering nonlinear creep and failure due to creep