Abstract:Abstract Pressure vessel components subject to high temperature and pressure are susceptible to life-limiting creep and/or creep-induced failure. Traditional continuum damage mechanics (CDM) based creep-damage model are used extensively for the prediction and design against creep in these components. Conventional creep experiments show considerable uncertainty in the creep response of materials where scatter can span decades of creep life. The objective of this paper is to introduce the probabilistic methods into a deterministic creep-damage model in order to predict experimental uncertainty. In this study, a modified Wilshire model capable of creep deformation, damage, and rupture prediction is selected. Creep deformation data for 304 stainless steel is collected from the literature consisting of quintuplicate (five) tests at 600°C with varying stress levels. It is hypothesized that the scatter in creep data is due to: test condition (temperature fluctuations and eccentric loading), initial damage (pre-existing surface and sub-surface defects), and metallurgical (local variation in microstructure) uncertainties. Probability distribution functions (pdfs) and Monte Carlo simulations are applied to introduce the uncertainties into the modified Wilshire equations. The domain of each source of uncertainty must be defined. A systematic calibration approach is followed where the material constant for each creep curve (in the quintuple) are obtained and statistical analysis is performed on the material properties to assess the random distribution associated with each uncertain material parameter. The probabilistic calibration begins with the introduction of test condition randomness (±2°C and ±3.2% MPa of nominal temperature/stress) in accordance with the ASTM standards. Cross calibration of temperature-stress variability proceeds the approximation of initial damage uncertainty which captures the remaining scatter in the data. Deterministic calibration unveils the range of variabilities associated with the material properties. The best-fitted pdfs are assigned to each uncertain parameter and subsequently, the deterministic model is converted into a probabilistic model where reliability is a tunable factor. A large number of Monte Carlo simulation are conducted to generate probabilistic creep deformation, minimum-creep-strain-rate (MCSR), and stress-rupture (SR) predictions. It is demonstrated that the probabilistic model produces quantitatively and qualitatively good fits when compared with experimental data. Future work will be directed towards the inclusion of service condition related uncertainty (power plant, turbine blade, Gen IV nuclear reactor application) into the probabilistic framework where the uncertainties are more robust.

Corrected and calibrated I2 absorption model at frequency-doubled Nd:YAG laser wavelengths.

Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material

New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling

Strain and Damage-Based Analytical Methods to Determine the Kachanov–Rabotnov Tertiary Creep-Damage Constants

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model

Comparison of a New Sin-Hyperbolic Creep Damage Constitutive Model with the Classic Kachanov-Rabotnov Model Using Theoretical and Numerical Analysis

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

Probabilistic Creep Modeling of 304 Stainless Steel Using a Modified Wilshire Creep-Damage Model

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

An integrated unified elasto-viscoplastic fatigue and creep damage model with characterization method for structural analysis of nickel-based high-temperature structure

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

The development of creep damage constitutive equations for high Cr steel

On the simulation of the small punch creep test—applied to 316L(N) austentic steels

CREEP DEFORMATION ANALYSIS OF A PIPE SPECIMEN BASED ON CREEP DAMAGE EVALUATION METHOD

An entropy-based failure prediction model for the creep process

Modelling for Creep Cavitation Damage and Life of Three Metallic Materials

Creep crack growth prediction using a damage based approach

Machine Learning Informed Visco-Plastic Model for the Cyclic Relaxation of 316H Stainless Steel at 550 C