Abstract:High-pressure and high-temperature(high-P-T) in-situ neutron diffraction detection method is a field of growing interest, in particular, for its numerous applications in the field of condensed matter physics, crystal chemistry, geophysics, materials science and engineering. In this work, we design and optimize a set of assembly for high-P-T in-situ neutron diffraction experiment in neutron source of China by using Paris-Edinburgh(PE)-type press. The high-P-T experiment is carried out with a high-pressure neutron diffraction spectrometer (Phoenix) of China Mianyang Research Reactor (CMRR). A 1500 KN uniaxial loading system and a 1500 W constant current source provides extreme conditions of high-P-T for PE press. The toroidal anvil we use is made of tungsten carbide. We use two types of gaskets: one is machined from the null-scattering TiZr alloy and the other is made from the thermal insulation ceramic material of ZrO2. High-temperature furnace is formed by graphite. First, a simplified simulation analyses of the pressure change rates in different areas of the entire assembly are carried out, and it is concluded that the gasket I, II, III areas are designed with a gradient decreasing method. The compression ratio of the sample chamber is significantly improved. Then when the gasket reaches the same compression ratio, the cell pressure will be higher than the pressure before optimization. After that, we conduct experimental verification on the optimized design. Through a series of optimization experiments for assembly on the rheological control of gasket, the improvement of thermal insulation performance and the maximization of effective sample volume under high-P-T, the key technical indicators and design scheme of the high-P-T in-situ neutron diffraction platform are verified. The temperature and pressure in the sample cavity are calibrated by using the MgO's high-P-T in-situ neutron diffraction spectrum and equation of state. The in-situ neutron diffraction sample cavity environment of the designed platform can reach the conditions of 11.4 GPa and 1773 K. The successful development of this assembly greatly improves the experimental conditions of CMRR high-P-T neutron diffraction platform. At the same time, it has important reference significance for further improving the high-P-T loading conditions of the PE-type press and expanding the application scope of the PE-type press.

Design and performance of the high‐resolution stress and texture neutron diffractometer HETU

HETU: a new high‐resolution stress and texture neutron diffractometer at China Mianyang Research Reactor

Study on the Performance of the Neutron Diffractometer (HIPD at CARR) by Monte Carlo Simulation and Convolution Methods

The progress of neutron texture diffractometer at China Advanced Research Reactor

The Neutron Diffraction Experiments under High Pressure and High Temperature on FENGHUANG Diffractometer at CMRR

The Design of High Energy Direct Geometry Chopper Spectrometer at CSNS

Upgrade of Xuanwu: A Dual-Mode Neutron Powder Diffractometer at CMRR

Neutronic Analysis of Ifmif High Flux Test Module for High Temperature Irradiation

The Latest Progress on Neutron Texture Diffractometer at China Advanced Research Reactor

An Ultra-High Temperature Furnace for Temperature Determination by Neutron Resonance Spectroscopy

Development of a High-Temporal Resolution Neutron Flux Measurement System for the HL-2M Tokamak

Optimal Design and Experimental Verification of High-Temperature and High-Pressure Assembly of Neutron Diffraction Based on PE-type Press

Design of a horizontal neutron reflectometer for the European Spallation Source

Establishment and Optimization of Angle Dispersive Neutron Diffraction Bulk Texture Measurement Environments

Conceptual Design and Simulation of Neutron Standard Test Beam at CAEP

HRTex : a high-resolution texture data processing tool for monochromatic neutron diffraction based on the pixel projection method

Design of coma-free Hettrick-Underwood type spectrometers for high energy resolution RIXS experimental station

Neutron Fourier diffractometer FSD for internal stress analysis: first results

High Pressure Neutron Diffraction Technology and Applications at CMRR

Conceptual Design of Target Station and Neutron Scattering Spectrometers for the Chinese Spallation Neutron Source

Application of Electronic time focusing at the Engineering Materials Diffractometer in the China Spallation Neutron Source