Abstract:The neutron flux of the Compact Pulsed Hadron Source (CPHS) is about 2–3 orders of magnitude lower than that of large neutron sources, which means that the beam intensity should be improved to achieve good statistics. Multi-pinhole collimation can be used to obtain a lower Q with an acceptable beam intensity in a very small angle neutron scattering (VSANS) instrument and a higher beam intensity for a larger sample size in a small-angle neutron scattering (SANS) instrument. A new nine-pinhole structure is used in a SANS instrument at CPHS to achieve an acceptable range and resolution of Q and a higher beam intensity compared to single-pinhole collimation. The crosstalk issue associated with multi-pinhole collimation is addressed using an optimized algorithm to achieve a higher safety margin and a larger pinhole size with a higher beam intensity at the sample. Different collimator aperture structures are compared on the basis of their noise production. Experiments are performed to verify the theory of calculating reflection noise from the inner surface of the collimator's aperture and parasitic noise from the beveled collimator structure. From a simulated SANS experiment using cold neutrons in the SANS instrument, it is clarified that multi-pinhole collimators with an opening angle on the downstream side have better performance than those with an opening angle on the upstream side and straight-cut collimators. Compared with a single-pinhole collimation system, a nine-pinhole collimation system increases the intensity at the sample by approximately sevenfold when the sample size is increased by 20-fold for CPHS-SANS, and the signal-to-noise ratio is improved by exploiting a specific collimator aperture structure. Our goal is to install a multi-pinhole collimator based SANS instrument at CPHS in the future, and it is hoped that these results will serve to promote the utilization of multi-pinhole collimation systems at other facilities.

Study on the Performance of the Neutron Diffractometer (HIPD at CARR) by Monte Carlo Simulation and Convolution Methods

The progress of neutron texture diffractometer at China Advanced Research Reactor

Demonstration of neutron time-of-flight diffraction with an event-mode imaging detector

Upgrade of Xuanwu: A Dual-Mode Neutron Powder Diffractometer at CMRR

Design and performance of the high‐resolution stress and texture neutron diffractometer HETU

The Latest Progress on Neutron Texture Diffractometer at China Advanced Research Reactor

Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer

Differential internal multi-reflection method for nano-displacement measurement

HETU: a new high‐resolution stress and texture neutron diffractometer at China Mianyang Research Reactor

Study of a Multi-Pinhole Collimation System Based Small-Angle Neutron Scattering Instrument at the Compact Pulsed Hadron Source

Advanced setup for high-pressure and low-temperature neutron diffraction at hydrostatic conditions

Analysis and Optimization of Spatial Resolution for a Neutron Sensitive Microchannel Plate Detector

Recent Progress Of Residual Stress Distribution And Structural Evolution In Materials And Components By Neutron Diffraction Measurement At Rsnd

Design of a Neutron-Tpc Prototype and Its Performance Evaluation Based on an Alpha-Particle Test

Performance Study of a Directional Fast Neutron Detection System Based on TPC and Plastic Scintillation Detectors

Realization and evaluation of doping and coating neutron sensitive MCP

High-Throughput Powder Diffraction Using White X-Ray Beam and a Simulated Energy-Dispersive Array Detector

A Method for the Measurement of Elastic Scattering Angular Distribution at HIRFL-RIBLL

A Monte-Carlo Simulation Method For The Study Of Self-Powered Neutron Detectors

Performance Study of the Neutron-Tpc

Establishment and Optimization of Angle Dispersive Neutron Diffraction Bulk Texture Measurement Environments