Abstract:This paper proposes a nanowatt voltage reference (VR) with temperature coefficient compensation. A simple temperature compensation circuit is designed to optimize the temperature coefficient at high temperatures, so that the proposed VR circuit can generate a reference voltage with a wider temperature range and a lower temperature coefficient. This paper proposes a nanowatt voltage reference (VR) with temperature coefficient compensation. All transistors work in the subthreshold region. The complementary‐to‐absolute‐temperature (CTAT) voltage and proportional‐to‐absolute‐temperature (PTAT) voltage are mainly generated by two NMOS transistors with different threshold voltages. At the same time, a simple temperature compensation circuit is designed to optimize the temperature coefficient at high temperatures, so that the proposed VR circuit can generate a reference voltage with a wider temperature range and a lower temperature coefficient. The proposed VR circuit is implemented using a standard 0.18‐μm CMOS process with an active area of only 0.022 mm2. The postlayout simulation results show that the proposed VR circuit generates a reference voltage of 308.21 mV at room temperature. Its temperature coefficient is 6.4 ppm/°C over a temperature range of −40°C°C–140°C, with a power consumption of 7.4 nW. The voltage line sensitivity (LS) is 0.098%/V, and the power supply ripple rejection (PSRR) is −72 dB @DC and −42 dB @10 MHz.

A 0.6 V voltage reference circuit with 57 ppm/ ◦ C temperature coefficient, 73 KΩ output impedance and 0.080% line sensitivity for energy efficient applications.

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A Novel High PSR Voltage Reference with Secondary Temperature Compensation

A Sub-1-V Nanopower MOS-Only Voltage Reference

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

A 0.8V Capacitively-Biased BJT-Based Temperature Sensor with an Inaccuracy of ±0.4°C ($\mathbf{3}\mathbf{\sigma}$) from −40°C to 125°C in 22nm CMOS

A 261mV Bandgap reference based on Beta Multiplier with 64ppm/0C temp coefficient

A 1V, 240 Nw, 7 Ppm/°c, High PSRR CMOS Voltage Reference Circuit with Curvature-Compensation

16.8/15.2 Ppm/°c 81 Nw High PSRR Dual-Output Voltage Reference for Portable Biomedical Application

A voltage reference circuit with ultra-low power using subthreshold and body effect techniques

A 1V Ultra-Low Power High Precision CMOS Voltage Reference

A 0.5 V, 650 Pw, 0.031%/V Line Regulation Subthreshold Voltage Reference

A 0.7‐V 7.4‐nW 6.4‐ppm/°C CMOS Subthreshold Voltage Reference With Temperature Compensation Circuit

Ultra‐low Power Voltage Reference with 40 Μa Maximum Load Current for Passive Sensor Systems

A Novel Low-power Low-voltage Reference

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

A 48 Pw, 0.34 V, 0.019%/V Line Sensitivity Self-Biased Subthreshold Voltage Reference with DIBL Effect Compensation

A Low-Voltage All-Metal Oxide Semiconductor Voltage Reference with Ultra-Low Power

A 275 pW, 0.5 V supply insensitive gate-leakage based current/voltage reference circuit for a wide temperature range of −55 to 100 °C without using amplifiers and resistors

A 0.85 V, 4.9 Ppm/°c Inherent Temperature Compensated Voltage Reference with −82 Db PSRR