Abstract:Reference voltage/current generation is essential to the Analog circuit design. There have been several ways to generate quality reference voltage using bandgap reference (BGR) and there are mainly two types: current mode and voltage mode. The current-mode bandgap reference (CBGR) is widely accepted in industry due to having an output voltage which is below 1 V. However, its drawbacks include a lack of proportional to absolute temperature (PTAT) current availability, a large silicon area, multiple operating points, and a large temperature coefficient (TC). In this paper, various operating points are explained in detail with diagrams. Similar to the conventional voltage mode bandgap reference (VBGR) circuits, modifications of the existing circuits with only two operating points have also been proposed. Moreover, the proposed BGR occupies a much smaller area due to eliminating the complimentary to absolute temperature (CTAT) current-generating resistor. A new self-biased opamp was introduced to operate from a 1.05 V supply, reducing systematic offset and TC of the BGR. The proposed solution has been implemented in 28 nm CMOS TSMC technology, and extraction simulations were performed to prove the robustness of the proposed circuit. The targeted mean BGR output is 500 mV, and across the industrial temperature range (−40 to 125 °C), the simulated TC is approximately 10.5 ppm/°C. The integrated output noise within the observable frequency band is 19.6 μV (rms). A 200-point Monte Carlo simulation displays a histogram with a 2.6 mV accuracy of 1.2% (±3-sigma). The proposed BGR circuit consumes 32.8 μW of power from a 1.05 V supply in a fast process and hot (125 °C) corner. It occupies a silicon area of 81 × 42 μm (including capacitors). This design can aim for use in biomedical and sensor applications.

A 261mV Bandgap reference based on Beta Multiplier with 64ppm/0C temp coefficient

A High Precision Circuit of Bandgap Voltage Reference

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A bandgap reference circuit with nominal value adjustable

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A 1.16-V 5.8-to-13.5-ppm/°C Curvature-Compensated CMOS Bandgap Reference Circuit With a Shared Offset-Cancellation Method for Internal Amplifiers

A 82μW Mixed-Mode sub-1V Bandgap reference with 25 ppm/°C Temperature Co-efficient with Simultaneous PTAT Generation

A 1.2-V 2.18-ppm/°C curvature-compensated CMOS bandgap reference

A Low Voltage High Precision CMOS Bandgap Reference

A 0.8V CMOS bandgap voltage reference design

A 2.6 ppm/°C 2.5 V Piece-Wise Compensated Bandgap Reference with Low Beta Bipolar

A Bandgap Reference with Temperature Compensation and Its Output Buffer

A 0.6 V voltage reference circuit with 57 ppm/ ◦ C temperature coefficient, 73 KΩ output impedance and 0.080% line sensitivity for energy efficient applications.

Low Supply Bandgap Voltage Reference

A 2.6 Ppm/Degrees C 2.5 V Piece-Wise Compensated Bandgap Reference With Low Beta Bipolar

Design of a bandgap reference voltage source with low temperature coefficient and high precision

A 3.95 ppm/°C 7.5 μW Second-Order Curvature Compensated Bandgap Reference in 0.11 μm CMOS

An improved 1.8 V 4.05 ppm/°C curvature corrected bandgap reference circuit

Cmos 2.5v Bandgap Voltage Reference

A 10.5 ppm/°C Modified Sub-1 V Bandgap in 28 nm CMOS Technology with Only Two Operating Points