Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

A 3.95 ppm/°C 7.5 μW Second-Order Curvature Compensated Bandgap Reference in 0.11 μm CMOS

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A High Precision Circuit of Bandgap Voltage Reference

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A 1.2-V 2.18-ppm/°C curvature-compensated CMOS bandgap reference

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A Near-1V 10ppm/℃ CMOS Bandgap Reference with Curvature Compensation

A sub-1V CMOS bandgap reference with high-order curvature compensation

Near-1 V 10 ppm/°C CMOS bandgap reference with curvature compensation

A 1.3 Ppm/°c BiCMOS Bandgap Voltage Reference Using Piecewise-Exponential Compensation Technique

Low Supply Bandgap Voltage Reference

A 1.8 V 0.918 Ppm/°c CMOS Bandgap Voltage Reference with Curvature-Compensated

A 1.8ppm/°C Low Temperature Coefficient Curvature Compensated Bandgap for the Low Voltage Application

A high-precision compensated CMOS bandgap voltage reference without resistors

Cmos 2.5v Bandgap Voltage Reference

A High-Order Curvature-Compensated CMOS Bandgap Reference

A Precise Curvature Compensated CMOS Bandgap Voltage Reference with Sub 1V Supply

New Curvature-Compensated CMOS Bandgap Voltage Reference

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

A 2.2-V 2.9-Ppm/℃bicmos Bandgap Voltage Reference with Full Temperature-Range Curvature-Compensation