Abstract:Internet-of-Things (IoT) applications require nW-power current references that are robust to process, voltage and temperature (PVT) variations, to maintain the performance of IoT sensor nodes in a wide range of operating conditions. However, nA-range current references are rarely area-efficient due to the use of large gate-leakage transistors or resistors, which occupy a significant silicon area at this current level. In this paper, we introduce a nA-range constant-with-temperature (CWT) current reference, relying on a self-cascode MOSFET (SCM) biased by a four-transistor ultra-low-power voltage reference through a single-transistor buffer. The proposed reference includes a temperature coefficient (TC) calibration mechanism to maintain performance across process corners. In addition, as the proposed design relies on the body effect, it has been fabricated and measured in 0.11-$\mu$m bulk and 22-nm fully-depleted silicon-on-insulator (FD-SOI) to demonstrate feasibility in both technology types. On the one hand, the 0.11-$\mu$m design consumes a power of 16.8 nW at 1.2 V and achieves a 2.3-nA current with a line sensitivity (LS) of 2.23 %/V at 25°C and a TC of 176 ppm/°C at 1.2 V from -40 to 85°C. On the other hand, the 22-nm design consumes a power of 16.3 nW at 1.5 V and achieves a 2.5-nA current with a 1.53-%/V LS at 25°C and an 82-ppm/°C TC at 1.5 V from -40 to 85°C. Thanks to their simple architecture, the proposed references achieve a silicon area of 0.0106 mm$^2$ in 0.11 $\mu$m and 0.0026 mm$^2$ in 22 nm without compromising other figures of merit, and are thus competitive with state-of-the-art CWT references operating in the same current range.

A 275 pW, 0.5 V supply insensitive gate-leakage based current/voltage reference circuit for a wide temperature range of −55 to 100 °C without using amplifiers and resistors

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A 2.5-nA Area-Efficient Temperature-Independent 176-/82-ppm/°C CMOS-Only Current Reference in 0.11-$μ$m Bulk and 22-nm FD-SOI

A voltage reference circuit with ultra-low power using subthreshold and body effect techniques

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

Current Reference with Low Temperature Drift and Low Power Supply

A 1V Supply, 81nW, 800mv Bandgap Reference Voltage Circuit for Low Power Devices

Current Reference with Temperature Compensation for Low Power Applications

Ultra‐low Power Voltage Reference with 40 Μa Maximum Load Current for Passive Sensor Systems

A 1.1- / 0.9-nA Temperature-Independent 213- / 565-ppm/$^\circ$C Self-Biased CMOS-Only Current Reference in 65-nm Bulk and 22-nm FDSOI

A 0.6 V voltage reference circuit with 57 ppm/ ◦ C temperature coefficient, 73 KΩ output impedance and 0.080% line sensitivity for energy efficient applications.

An Ultra-Low Power 14.6ppm/°c 1.2V Bandgap Voltage Reference with Low Leakage Sample-and-Hold Switch

A Low-Voltage All-Metal Oxide Semiconductor Voltage Reference with Ultra-Low Power

A 0.5 V, 650 Pw, 0.031%/V Line Regulation Subthreshold Voltage Reference

A Family of Current References Based on 2T Voltage References: Demonstration in 0.18-$μ$m with 0.1-nA PTAT and 1.1-$μ$A CWT 38-ppm/$^\circ$C Designs

A New Cmos Current Reference with High Order Temperature Compensation

A 82μW Mixed-Mode sub-1V Bandgap reference with 25 ppm/°C Temperature Co-efficient with Simultaneous PTAT Generation

Low Supply Bandgap Voltage Reference

A 1770- $\mu$ M 2 Leakage-Based Digital Temperature Sensor with Supply Sensitivity Suppression in 55-Nm CMOS