Abstract:Abstract High density polyethylene (HDPE) is widely used in city water and gas piping system and even in nuclear engineering for its excellent properties in flexibility, impact resistance, aging and corrosion resistance, reliable connection, long service life. It is generally believed that the typical failure mode of PE pipe under long-term static pressure load is the slow crack growth (SCG) caused by creep crack initiation (CCI) and creep crack growth (CCG), which is a kind of quasi-brittle failure. Scratching often occurs during PE pipe installation due to the drag of pipe without any protection, which would leave axial cracks as the initial defect. This would harm the long term performance of pressurized HDPE pipe. In the present work, the creep crack kinetics was experimentally determined in term of C* integral, and then CCG behavior of PE pipe with axial semi-elliptical crack was discussed. With the help of a CARE electronic universal testing machine and DIC displacement measuring system, creep tests are performed with smooth bar specimen of PE100 pipe parent material. And the stationary creep law parameters were determined. The crack opening displacement (COD) rates were determined by creep cracking test with cracked round bar specimen. With the help of compliance calibration tests, the COD curves were changed into crack propagation curves and the creep crack kinetics was eventually determined in term of C* integral. By assuming an semi-elliptical crack front with nearly the same C* integral, the creep crack propagation was predicted with the determined crack kinetics. And the allowable initial crack size was also determined for the PE pipe discussed. Compared with that determined in terms of SIF, current study yields much margin for the allowable initial crack.

Effect of carbon black incorporation methods on the initial creep/slow crack growth resistance and properties of high-density polyethylene (HDPE) pipes

The effect of carbon black on degradation of pipe grade black polyethylene in high concentration chlorine dioxide solutions

Improvement of Mechanical Properties and Ultraviolet Resistance of Polyethylene Pipe Materials Using High Density Polyethylene Matrix Grafted Carbon Black

Filled Polyolefin Composites Prepared From In-Situ Polymerization Via A Catalyst-Supported Approach - I. Morphology Of Pe In Carbon Black(Cb)/Pe In-Situ Composites

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

Effect of Short Chain Branches Distribution on Fracture Behavior of Polyethylene Pipe Resins

Effects of Addition of Ultra-High Molecular Weight Polyethylene on Tie-Molecule and Crystallization Behavior of Unimodal Pe-100 Pipe Materials

CCG of PE100 and Life Prediction of PE Pipe With Axial Semi-Elliptical Crack

Morphology and Electrical Conductivity of Injection-Molded Polypropylene/Carbon Black Composites with Addition of High-Density Polyethylene

Study on Viscoelastic Behavior During Slow Crack Growth of Medium Density Polyethylene Pipes

HDPE crystalline lamellae in composites involving pyrolytic carbon black: Effect on elastic modulus

Improving Environmental Stress Cracking Resistance of High‐Density Polyethylene Grades by Comonomer Addition and Nanocomposite Approach

Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends

Morphology and properties of HDPE/DBDPO/Sb2O3/conductive carbon black composite

Effect of Processing Technology on the Electrical Conductivity of Polymer Blends Filled with Carbon Black

Effect of small amount of ultra high molecular weight component on the crystallization behaviors of bimodal high density polyethylene

High-Density Polyethylene/Carbon Black Composites in Material Extrusion Additive Manufacturing: Conductivity, Thermal, Rheological, and Mechanical Responses

Evaluation of mechanical and thermal properties and creep behavior of micro- and nano-CaCO3 particle-filled HDPE nano- and microcomposites produced in large scale

Dynamic Rheological Properties for HDPE/CB Composite Melts

Effect of Surface Oxygen Content of Carbon Black on Electrical Properties of HDPE-Carbon Black Composites

Crystallization Behavior and Mechanical Properties of Polypropylene/modified Carbon Black Composites