Abstract:Studies on the relationship between resistivity and dynamic rheological properties of carbon black-filled high-density polyethylene (CB/HDPE) composites were carried out. Change of resistivity rho is associated with the dynamic modulus before the positive temperature coefficient/negative temperature coefficient (PTC/NTC) temperature. When the temperature approaches the melting point of HDPE, rho increases rapidly with a decreasing modulus, corresponding to PTC transition. The resistivity-dynamic viscoelasticity relationship in the PTC region can be divided into two parts in which the changes of rho with storage modulus G' and loss modulus G" can be described by the scaling laws given by the critical storage modulus and loss modulus G' (c), and G" (c); adjustable parameters rho'(1c), rho'(2c), rho"(1c) and rho"(2c); and nonlinear exponents n and m, respectively. The accordance between the experimental data and the scaling functions of the dimensionless quantities (G'/G'(c) - 1) and (G"/G"(c) - 1) in the PTC transition region suggests that the rho jump may be the result of a modulus-induced percolation. G'(c) and G"(c) increase, but the four scaling resistivitis, rho'(1c), rho'(2c), rho"(1c), and rho"(2c), decrease with increasing CB concentration, implying that the microstructure change of the composites is the determinant factor for the PTC behavior and the resistivity-dynamic modulus relationship. However, rho'(2c) and rho"(2c) exhibit no scaling dependence. It is suggested that a threshold concentration exists for the modulus of the composites on the basis of examining the plot of both G'(c) and G"(c) against CB concentration. The scaling laws G' similar to Phi(x) and G" similar to Phi(y) hold for the concentration dependence of the critical modulus when Phi > Phi(c) and the estimated values of x and y are 1.10 +/- 0. 10 and 0.89 +/- 0.29, respectively. The resistivity-dynamic modulus can shift to form a master curve. The horizontal factors a(G') and a(G") and the vertical factors a' and a" are relevant to the concentration dependence of the dynamic modulus or PTC behavior. It is believed that the former would be involved in changing the mechanical microstructure formed by the complicated interaction of CB particle and polymer segments, and the latter would be involved in the overall changes of conducting a network during the PTC transition region. (C) 2003 Wiley Periodicals, Inc.

Dynamic Rheological Properties for HDPE/CB Composite Melts

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Correlation Between Oxidation-induced Crosslinking and Rheological Behavior of HDPE

Relationship Between the Positive Temperature Coefficient of Resistivity and Dynamic Rheological Behavior for Carbon Black‐filled High‐density Polyethylene

Dynamic Viscoelasticity of Low‐density Polyethylene/in‐situ‐grafted Carbon Black Composite

Simultaneous Measurement of Resistance and Viscoelastic Responses of Carbon Black‐filled High‐density Polyethylene Subjected to Dynamic Torsion

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

Dynamic Rheological Behavior of Hdpe/Uhmwpe Blends

Influence of Annealing on Rheological and Conductive Behaviors of High-Density Polyethylene/carbon Black Composites

Rheological properties of HDPE/EVA/CB system and its response to radiation

HDPE crystalline lamellae in composites involving pyrolytic carbon black: Effect on elastic modulus

Estimation of the Agglomeration Structure for Conductive Particles and Fiber-Filled High-Density Polyethylene Through Dynamic Rheological Measurements

Rheological Behavior of Carbon Black Filled Polystyrene Melts

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS

Dynamic Mechanical Properties and Morphology of High‐density Polyethylene/caco3 Blends with and Without an Impact Modifier

Thermal-induced Percolation in High-Density Polyethylene/carbon Black Composites

Conduction Stability of High-Density Polyethylene/Carbon Black Composites Due to Electric Field Action

Annealing-Induced Rheological and Electric Resistance Variations in Carbon Black-Filled Polymer Melts

Temperature-dependence of dynamic rheological properties for high-density polyethylene filled with graphite

Rheological Properties of HDPE and LDPE at the Low-Frequency Range under Supercritical CO2

Study on Degradation and Crosslinking of Impact Polypropylene Copolymer by Dynamic Rheological Measurement