Abstract:XRD, DSC, Raman and FTIR yield diffrent perceptions of HDPE crystallinity. In order to predict the mechanical behavior of particle reinforced polymer composites, it is crucial to study changes in polymer phase distribution upon interaction with the load in the undeformed state. In this work, HDPE composites reinforced with pyrolytic carbon black (rCBNF) particles, including some rCB modified by mild air oxidation (rCBF), which enabled the aggregation of residual chemisorbed rubber at the surface, examined in a previous work. The development of lamellar morphology induces conformational behaviors resulting from interactions fillers/polymer chains. These interactions cannot be determined by DSC alone but involve short‐range FTIR and Raman and long‐range XRD models. The Raman crystalline content of HDPE was significantly reduced by the presence rCBFs and N330, which varied with lamellar morphology. This process involves the displacement of crystalline lamellae into sublayers by nucleation and crystal growth, resulting in the release of linker molecules, limiting entanglement and improving the elastic properties of the amorphous phase. A significant amount of amorphous phase was produced with N330 and oxidized rCBFs, in which the carbon surface was free of residual rubber. Mechanical tensile tests showed an improvement in the elastic modulus of composites containing these fillers. Highlights N330 and oxidized rCBFs have surface free of the residual rubber contained in rCBNF. Significant reduction in the Raman crystallinity of HDPE with rCBF and N330. Reduction varies with lamellar size through nucleation and crystal growth. Strong release of the tie molecule improves the elastic modulus of HDPE/rCBF. Improved mechanical tensile properties of HDPE/rCBF and HDPE/N330.

Filled Polyolefin Composites Prepared From In-Situ Polymerization Via A Catalyst-Supported Approach - I. Morphology Of Pe In Carbon Black(Cb)/Pe In-Situ Composites

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Rheological Behavior of Carbon Black Filled Polystyrene Melts

Colorating and Mechanical Performance of Low-Density Polyethylene (Ldpe)/dye-Loaded Shell Powder (DPSP) Composites

Styrene-butadiene-styrene Copolymer Compatibilized Carbon Black/polypropylene/polystyrene Composites with Tunable Morphology, Electrical Conduction and Rheological Stabilities.

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Characterization of Carbon Black-Filled Immiscible Polypropylene/Polystyrene Blends

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

Mechanical and Thermal Properties of Low Density Polyethylene Composites Filled with Dye-Loaded Shell Powder

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

Research in Morphology of Polypropylene Grafting Maleic Anhydride /sio2 Supported Titanium Catalysts and Polyethylene

Preparation of polyethylene/Siloxene nanocomposites through siloxene‐MgCl supported Ziegler‐Natta catalyst

Time-concentration Superpositioning Principle Accounting for the Reinforcement and Dissipation of High-Density Polyethylene Composites Melts

DSC and Morphological Studies on the Crystallization Behavior of Β-Nucleated Isotactic Polypropylene Composites Filled with Kevlar Fibers

Enhanced properties of polyethylene through in situ polymerization with siloxene‐supported vanadium‐based catalysts

B(C6F5)3 grafted inorganic fillers for supported titanium catalyzed synthesis of UHMWPE composites

HDPE crystalline lamellae in composites involving pyrolytic carbon black: Effect on elastic modulus

The Preparation and Characterization of Carbon Nanosphere/Polyethylene Composites

Influences of Compatibilization and Compounding Process on Electrical Conduction and Thermal Stabilities of Carbon Black‐filled Immiscible Polypropylene/polystyrene Blends