Abstract:An organic/inorganic support of immobilizing catalysts for ethylene polymerization was devised. The composition of the hybrid catalyst is as following: styrene and acrylic copolymer (PSA) is the organic part for binding iron (III) acetylacetonate and his(imino) pyridyl ligand catalyst,and SiO2, (Davison 955 silical gel) is the inorganic part. The inorganic part is coated by the organic part (PSA) by sol-gel method. The catalyst could produce not only high crystallinity (72%) polyethylene,but also alpha-olefin. We considered the impact of different membrane materials and polymerization conditions (different cocatalyst, pressure, temperature, Al/Fe molar ratio) to the polymerization activity and properties of polymers and found that temperature had the greatest impact to the weight ratio of oligomer to PE. Because of the poor thermal stability of catalyst, the catalytic activity significantly attenuated with increasing temperature. When pressure increased, catalytic activity would increase too. The relationship of pressure and catalytic activity met the cossee catalytic reaction mechanism, which was widely accepted in Ziegler-Natta catalyst ' s ethylene polymerization mechanism. Different membrane materials would affect the final polyethylene product performance, the pure PSA as organic part would increase the molecular weight significantly. Cocatalysts affect not only the catalytic performance,but also the property of the final product. The alkylaluminium as cocatalyst tended to decrease the molecular weight. The iron catalyst system binding on the PSA after the treatment of magnesium chloride could produce the polyethylene of lower molecular weight (M-w = 11. 9 x 10(4)) and higher crystallinity (72%). And the polyethylene s melt index MI (2. 35 g/10min) was higher than the iron catalyst binding on other membrane materials. The polyethylene can be used as the low molecular weight part of bimodal polyethylene.

The Preparation and Characterization of Carbon Nanosphere/Polyethylene Composites

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

Filled Polyolefin Composites Prepared From In-Situ Polymerization Via A Catalyst-Supported Approach - I. Morphology Of Pe In Carbon Black(Cb)/Pe In-Situ Composites

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Preparation and Characterization of Novel Polyethylene/carbon Nanotubes Nanocomposites with Core–shell Structure

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

PREPARATION OF NOVEL POLYETHYLENE-graft-POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

The preparation of nanosized polyethylene particles via carbon sphere nanotemplates

Study on ethylene polymerization catalyzed by Cp2ZrCl2/carbon nanotube system

Research in Morphology of Polypropylene Grafting Maleic Anhydride /sio2 Supported Titanium Catalysts and Polyethylene

Preparation of Nanopolyethylene Wire with Carbon Nanotubes‐supported Cp2ZrCl2 Catalyst

Preparation and characterization of PET/silica nanocomposites

Polyethylene/palygorskite Nanocomposites: Preparation by in Situ Polymerization and Their Characterization

Preparation of nanosheet polyethylene with heterogeneous metallocene catalyst and formation mechanism of nanosheet polyethylene.

Preparation and properties of polyarylene ether nitrites/multi-walled carbon nanotubes composites

Preparation of nano-polyethylene fibres using Cp2ZrCl2/carbon nanotube catalytic system

MCM-41 and SBA-15 supported Cp2ZrCl2 catalysts for the preparation of nano-polyethylene fibres via in situ ethylene extrusion polymerization

Preparation of polyethylene/Siloxene nanocomposites through siloxene‐MgCl supported Ziegler‐Natta catalyst

Organic/Inorganic Support for Immobilizing Iron (iii) Acetylacetonate and Bis(Imino)Pyridyl Ligand Catalyst System for Ethylene Polymerization