Effect of annealing temperature on the properties of 0.5Bi4Ti3O12-0.5BiFe0.98Mn0.02O3 thin films

Yan Liu,Zhibiao Ma,Yangyang Wang,Bingdong Yao,Jingxian He,Jing Li,Fengqing Zhang

DOI: https://doi.org/10.1016/j.ceramint.2022.06.116

IF: 5.532

2022-10-01

Ceramics International

Abstract:The 0.5Bi4Ti3O12-0.5BiFe0.98Mn0.02O3 (BTBF) composite film based on fluorine doped tin dioxide (FTO)/glass was prepared by the sol-gel method. The structure, oxygen vacancy concentration, electrical properties and aging of BTBF composite films were tested and analysed at various annealing temperatures (T = 570, 585, 600, 615, 630 °C). X-ray diffraction (XRD) analysis indicated that Bi4Ti3O12 and BiFe0.98Mn0.02O3 formed an Aurivillius structure with a 4-layer perovskite structure after being made into a solid solution, and the crystallinity of the sample at T = 615 °C was better. The scanning electron microscope (SEM) results showed that the average crystal size of the samples increased with increasing annealing temperature. X-ray photoelectron spectroscopy (XPS) fitting results indicated that the specimens all had oxygen vacancy defects and that the concentration of oxygen vacancies in the specimens was lower at T = 615 °C. By analysing the electrical properties of the BTBF composite film, it was found that the samples at 615 °C had better ferroelectricity and lower leakage current density, the remnant polarization intensity (2Pr) was approximately 31.1 μC/cm2, the coercive field intensity (2Ec) was approximately 682.1 kV/cm, and the leakage current density was approximately 1.3 × 10−5 A/cm−2 when the electric field was 400 kV/cm. In addition, the aging of the samples was analysed, and it was found that the samples underwent different degrees of aging. The aging mechanism is also discussed.

materials science, ceramics