Abstract:The plateau stress and energy absorption of low density (≤300 kg/m3) polyurea (PU) foams and expanded polystyrene (EPS) were measured at deformation rates ranging from 0.004 s−1 to 5000 s−1. Low (≤10−1 s−1) strain rate testing was performed using an Instron load frame, intermediate (101–102 s−1) strain rates using a drop-weight impact tower, and high (≥103 s−1) strain rate conditions using a modified split-Hopkinson pressure bar. The plateau stress and energy absorption of low density PU foams exhibit a strong rate dependence across all deformation rates. This result has been previously unreported for low density polymer foams under low and intermediate strain rates. The strain rate sensitivity of PU foams was found to be strongly dependent on cell size for low strain rates and cell wall aperture size for intermediate and high strain rates. EPS type foam, however, remained nearly insensitive to strain rate. At low and intermediate strain rates, the plastic crushing in the EPS and the high plateau stress yield a much higher energy absorption capability than the viscoelastic dissipation in the PU foams. However, PU foams were found to display similar energy absorption properties as EPS based foams under high strain rates. Thus, controlling the strain rate sensitivity of PU foams through aperture diameter can lead to an increase in energy absorption properties at high strain rates, while simultaneously maintaining the peak stress below certain injury thresholds. Additionally, unlike EPS, which undergo plastic crushing after first impact, flexible polyurea foams will recover fully after each impact and thus will have multiple hit capabilities. This will allow these materials to have a wide range of applications, in advance body armors and protective headgears to use in low-cost protection systems for a wide range of military platforms, civilian, and space applications.

Temperature Dependent Dynamic Response of Open-Cell Polyurethane Foams

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

Energy Absorption and Low Velocity Impact Response of Open-Cell Polyurea Foams

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

Tailoring the rate-sensitivity of low density polyurea foams through cell wall aperture size

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

The impact performance of density-graded polyurea elastomeric foams

Mechanical Properties Of Open-Cell Metal Foams Under Low-Velocity Impact Loading

Dynamic response of open cell dry foams

Characterizing and Modeling the Wide Strain Rate Range Behavior of Air-Filled Open-Cell Polymeric Foam

Static Mechanical Properties of Expanded Polypropylene Crushable Foam

Assessment of frequency and amplitude dependence on the cyclic degradation of polyurethane foams

Assessment of Multiaxial Mechanical Response of Rigid Polyurethane Foams

Mechanical Properties of Flexible Polyurethane Foams under Impact Loading

Compressive properties and energy absorption of rigid polyurethane foam

Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams

Pilot Study Investigating Effects of Changing Process Variables on Elastic and Energy-Absorbing Characteristics in Polyurethane/Agglomerated Cork Mix for Use in Micro-Transport Helmet

Mechanical Performance and Cushioning Energy Absorption Characteristics of Rigid Polyurethane Foam at Low and High Strain Rates

Quasi-static and dynamic mechanical responses of hybrid laminated composites based on high-density flexible polyurethane foam

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams