Abstract:Sand is extensively used in geotechnical engineering applications due to its abundance in the field. In general, sands are subjected to very low strain rates in most geotechnical engineering applications; however, during air or surface blasts, sands are subjected to high strain rates and their response needs to be studied in detail. The recent years have seen an increase in the usage of split Hopkinson pressure bar (SHPB) device to study the response of sand at very high stresses (on the order of MPa) and strain rates (10~1000/s). Researchers have shown that the particle size in sand influences its mechanical behavior at low strain rates. However, the effect of particle size on the stress-strain response of sand obtained from an SHPB device where particles are subjected to high strain rates is seldom studied. The particle size could also have an influence on the stress-equilibrium condition which needs to be satisfied by the specimen for the stress-strain analysis from the SHPB to be valid. However, the afore mentioned criteria are seldom studied and need to be studied in detail. In the current study, the SHPB device is modelled using a commercial software package LS-DYNA with a coupled finite elements-discrete element method. The sand specimens are modelled using polydisperse (spheres with varying sizes) and monodisperse discrete spheres. These simulations are used to understand the variation of stress-strain response of sand as a function of particle sizes. The study also provides insight into the effect of friction at the boundaries on the stress-strain response of the specimen. The results indicate that the specimen having larger polydisperse spheres provided similar stress-strain response as the specimen having smaller polydisperse spheres. However, the monodisperse specimen provided a softer response compared to the polydisperse specimens.

Effect of particle size on small strain stiffness of biotreated sands

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Influence of Cyclic Loading History on Small Strain Shear Modulus of Saturated Clays

Effect of Multiscale Particle Morphology on Small-Strain Shear Modulus of Irregularly Shaped Sand under Isotropic Consolidation: Triaxial Bender Element Tests on 3D-Printed Sand

Shear Modulus and Damping Ratio of Sand–Gravel Mixtures Over a Wide Strain Range

Small-strain shear modulus (Gmax) and microscopic pore structure of calcareous sand with different grain size distributions

A comprehensive numerical investigation of multi-scale particle shape effects on small strain stiffness of sands

Small-strain shear modulus of calcareous sand under anisotropic consolidation

Effect of Anisotropic Stress State on Elastic Shear Stiffness of Sand–Silt Mixture

Effect of Particle Size on the Shear Strength Behavior of Sands

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Effect of Particle Size on High-Strain Rate Response of Sand

Effects of particle size on mechanical behaviors of calcareous sand under triaxial conditions

Effect of Sand Particle Size on Hydraulic-Mechanical Behavior of Bentonite-Sand Mixtures

Measurement of Small Strain Shear Modulus of Clean and Natural Sands in Saturated Condition Using Bender Element Test

Influence of Bacterial Suspension Type on the Strength of Biocemented Sand

Effects of consolidation conditions on the dynamic shear modulus of saturated coral sand over a wide strain range

Effect of complex-grain-size curves on shear modulus degradation of calcareous sand

Effect of particle size and gradation on compressive strength of MICP-treated calcareous sand

Experimental Study on Asymptotic Behaviour of Anisotropic Sand