Abstract:As a kind of unique marine sediment, Calcareous sand exhibits high compressibility because its irregular particle morphology leads to the formation of large interparticle voids. In this study, using calcareous sand samples from the South China Sea, we employed X-ray CT scanning technology to reveal the microstructural evolution of calcareous sand during compression. This allowed us to establish correlations between particle morphology, relative density, vertical stress, and microstructural parameters. The research findings are as follows: (1) Samples with a higher proportion of cube shape particles have larger initial void ratios, and experience a more significant decrease in void ratio under stress. Dense samples exhibit greater deformation resistance and lower particle breakage rates, resulting in a slower reduction in void ratio under stress. (2) The number of pores in the samples follows a V-shaped trend with an increase in the proportion of cube shape particles, reaching its minimum when the proportions of cube shape and platy shape particles are balanced. The number of pores increases with an increase in vertical stress and relative density. (3) The equivalent pore diameter and pore volume of the samples exhibit an inverted V-shaped trend with an increase in cube shape particle content, reaching their maximum when the proportions of cube shape and platy shape particles are balanced. (4) The more cube shape particles in the sample, the more irregular the pore shapes become. Under vertical stress, the influence of particle morphology on pore shape gradually diminishes until it disappears. (5) The particle coordination number in the samples predominantly falls within the range of 3.79–5.68. The coordination number increases with increasing relative density and vertical stress, with vertical stress exerting a significantly greater influence on the coordination number than relative density. Under vertical stress, samples with more cube shape particles exhibit smaller coordination numbers and higher particle breakage rates.

Effects of particle size on mechanical behaviors of calcareous sand under triaxial conditions

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Mechanical behavior and particle breakage of calcareous sand in triaxial test

Experiment of initial relative density effects on sand strength

Image Analysis on Grain Kinematics and Grain Breakage of Carbonate Sands from South China Sea During Confined Compression

Experimental investigation on mechanical behavior and particle crushing of calcareous sand retrieved from South China Sea

Microscopic study of the impact of particle morphology on the compressibility of calcareous sands

The role of incremental stress ratio in mechanical behavior and particle breakage of calcareous sand

Effects of Size and Shape on the Crushing Strength of Coral Sand Particles under Diametral Compression Test

Study on shear characteristics of calcareous sand with different particle size distribution

Effect of Particle Shape on the Liquefaction Resistance of Calcareous Sands

Influence of the Fractal Distribution of Particle Size on the Critical State Characteristics of Calcareous Sand

Effect of Particle Breakage and Interlocking on Strength and Dilatancy Characteristics of Calcareous Sands

Effect of rubber particles on mechanical properties of calcareous sand under large displacement shear

Dynamic mechanical response and particle breakage characteristics of calcareous sand

Effects of Particle Breakage on the Mechanical Behavior of Calcareous Sand Under Confined Compression Tests

Experimental study on the effects of water content on the compression characteristics and particle breakage of calcareous sand

Particle Shape Influence on the Deformation Resistance of Carbonate Sands under Drained Condition

STUDY ON CRUSHING PROCESS AND MICROSCOPIC MECHANISM OF CALCAREOUS SAND

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Particle breakage and morphology changes of calcareous sands under one-dimensional compression loading