Abstract:This thesis is focused on numerical simulations of the laser interaction with porous materials. A possibility of well-controlled processing is particularly important for the laser based micro-structuring of porous glass and nano-machining of semiconducting porous materials in the presence of metallic nanoparticles. To understand the periodic micro-void structures produced inside porous glass by femtosecond laser pulses, a detailed numerical thermodynamic analysis was performed. The calculation results show the possibility to control laser micro-machining in volume of SiO2. The obtained characteristic dimensions of the structures correlate with the experimental results. Comparing to the porous glass, the mesoporous TiO2 films loaded by Ag ions and nanoparticles support localized plasmon resonances. To identify the optimum parameters of the continuous-wave laser, a multi-physical model considering Ag nanoparticle growth, photo-oxidation, reduction was developed. The performed simulations show that the laser writing speed controls the Ag nanoparticles size. The thermally activated fast growth followed by the photo-oxidation was found to be the main reason for the writing speed-dependent size-change and temperature rises. Writing of mesoporous TiO2 films loaded with Ag nanoparticles by a pulsed laser is, furthermore, promising to provide additional possibilities in the generation of two kinds of nanostructures: laser-induced periodic surface grooves and Ag nanogratingsinside the TiO2 film. To better understand the effects of a pulsed laser, two multi-pulses models are developed to simulate the Ag nanoparticle growth. The obtained results provided new insights into laser micro-processing of porous material and better laser controlling over nanostructuring in porous semiconducting films loaded with metallic nanoparticles.

Numerical Investigation of Laser-Assisted Nanoimprinting on a Copper Substrate from a Perspective of Heat Transfer Analysis

HEAT TRANSFER ANALYSIS OF LASER-ASSISTED NANO-IMPRINTING ON A METALLIC SUBSTRATE – TECHNICAL COMMUNICATION

Axisymmetric thermo-mechanical analysis of laser-driven non-contact transfer printing

Towards obtaining high-quality surfaces with nanometric finish by femtosecond laser ablation: A case study on coppers

Thermo-mechanical Modeling of Laser-Driven Non-Contact Transfer Printing: Two-Dimensional Analysis

Study on Laser-Controlled Surface Preparation and Condensation Heat Transfer Characteristics of Copper-Based Micro-Nano Structure Surface

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Ultrafast Patterning Of Nanostructures In Polymers Using Laser Assisted Nanoimprint Lithography

Study for Laser Controlled Fabrication of Micro/Nano-Structures of Silicon Based on Multi-Physics Model

High-Temperature Imprinting and Superhydrophobicity of Micro/Nano Surface Structures on Metals Using Molds Fabricated by Ultrafast Laser Ablation

Study on the Technology and Properties of Green Laser Sintering Nano-Copper Paste Ink

The Investigations of Laser‐Enhanced Copper Plating on a Good Heat Conducting Copper Foil

Numerical simulation and experimental study of femtosecond laser ablation of copper: A two-temperature model with temperature-dependent properties and multiple phase transitions

Picosecond Laser Interference Patterning of Periodical Micro-Architectures on Metallic Molds for Hot Embossing

Joint Process of Laser Shock Polishing and Imprinting for Metallic Nanostructure Fabrication

Numerical study of laser micro- and nano-processing of nanocomposite porous materials

Nanofabrication with the thermal AFM metallic tip irradiated by continuous laser

Investigation of through micropatterns fabrication on C194 copper foil by ultraviolet nanosecond pulsed laser microdrilling

Laser-assisted direct roller imprinting of large-area microstructured optical surfaces

Thermal Probing in Single Microparticle and Microfiber Induced Near-Field Laser Focusing

Altering the surface wettability of copper sheet using overlapping laser shock imprinting