Abstract:Lanthanum borate-based glass-ceramic has recently received considerable attention in the field of high-frequency communications as a sintering aid, due to the low sintering temperature and the precipitation of crystalline phases with excellent dielectric and mechanical properties. Importantly, the densification and crystallization behaviors of glass-ceramic are not only determined by its composition, but also affected by various processing parameters, such as the initial particle size, which is rarely explored for optimizing the dielectric and mechanical properties of lanthanum borate-based glass-ceramic/ceramic composites. Herein, La2O3–B2O3–CaO–P2O5–SiO2 (LBCPS) glass-ceramics with a series of initial particle sizes are achieved by ball milling method through controlling the milling time. Employing LBCPS glass-ceramics with different particle sizes as the sintering aid, various LBCPS/Al2O3 composites are fabricated, and the dielectric and mechanical properties of which are further investigated. Notably, the LBCPS/Al2O3 composite with a moderate glass-ceramic particle size of 2.7 μm exhibits the excellent comprehensive performance with a low dielectric loss of 8.6 × 10−4 at 9.8 GHz and a high flexural strength of 199 MPa. Moreover, the influencing mechanisms of the glass-ceramic particle size on the crystallization, microstructure, and densification of the LBCPS/Al2O3 composite have also been systematically explored and proposed. This research work provides an intriguing strategy for optimizing the dielectric and mechanical properties of the glass-ceramic/ceramic as the high-performance low-temperature co-fired ceramic (LTCC) substrate.

Tuning size distribution of zinc borosilicate glass additives by the length of gallate molecular chain during ball milling for lowering the sintering temperature of copper paste

Surfactant-stabilized copper paticles for low-temperature sintering: Paste preparation using a milling with small zirconia beads: Effect of pre-treatment with the disperse medium

Effect of properties and crystallization behavior of BaO‐ZnO‐B 2 O 3 ‐SiO 2 glass on the electrical conductivity of Cu paste

Achieving high adhesion and low‐temperature sintering for multilayer ceramic capacitors by tunning the structure of SrO‐ZnO‐B2O3‐SiO2 glass

Optimizing the size distribution of zinc borosilicate glass powder by organic solvent and tetradecylphosphonic based wet milling

Synthesis of PVZ Glass and Its Improvement on Mechanical and Electrical Properties of Low Temperature Sintered Silver Paste

Formation of a Highly Conductive Thick Film by Low-Temperature Sintering of Silver Paste Containing a Bi2O3-B2O3-ZnO Glass Frit

Effects of viscosity and wettability of Pb-B-Si-O glass in silver paste on the co-firing densification of LTCC

Submicron Cu@glass core-shell powders for the preparation of conductive thick films on ceramic substrates

Constructing Artificial Glass Nanobarrier Layer on Copper Spheres with Robust Antioxidation Properties for Printable Electrode

Particle size modulation for effectively optimizing the dielectric and mechanical properties of La2O3–B2O3 based glass-ceramic/ceramic LTCC substrates

Influence of Li2O–B2O3–SiO2 Glass on the Sintering Behavior and Microwave Dielectric Properties of BaO–0.15ZnO–4TiO2 Ceramics

Low-Temperature Sintering of Ag Composite Pastes with Different Metal Organic Decomposition Additions

Study on Low-Temperature Conductive Silver Pastes Containing Bi-Based Glass for MgTiO3 Electronic Power Devices

Optimizing mechanical and electrical properties of Cu-coated Cu–Zr–Al bulk metallic glass composites by adjusting glassy powder size

Facile synthesis and electrical performance of silica-coated copper powder for copper electronic pastes on low temperature co-fired ceramic

The effects of complex agent and sintering temperature on conductive copper complex paste

Synthesis and Characterization of Highly-Dispersed Copper Submicron Particles for Low Temperature Sintering Joints

Effects of Li2O-B2O3-SiO2 glass on the low-temperature sintering of Zn0.15Nb0.3Ti0.55O2 ceramics

Effective Sintering Aids of Boric Frit and Lithium Salts for Low-Temperature Sintering of Dielectric Ceramics

Preparation of B2O3-ZnO-SiO2 Glass and Sintering Densification of Copper Terminal Electrode Applied in Multilayer Ceramic Capacitors