Cold Hole Expansion Process for Stress Analysis and Evaluation of Fatigue Properties

Basavaraj Kawdi,Dr. N. Shanmukh

Abstract:Cold expansion of fastener holes has been successfully used for many years to impart beneficial compressive residual stresses. These residual stresses serve to extend crack initiation lives and to slow down growth of small cracks. In this paper stress analysis in open holes in Aluminium alloys 7050 series have been carried out with FEM approach. The Split-Sleeve process has been used wherein expansion of the hole is accomplished by putting tapered mandrel prefitted with a lubricated split sleeve through the hole. The mandrel and the sleeve are designed to generate a prescribed amount of plastic deformation around the hole that in turn creates a state of biaxial residual compressive stress in that area. A typical development of plastic deformation in terms of Von Mises stresses in 7050 Al plates were examined. Tests were carried out using plates containing plain holes and cold expanded holes in aluminium. Residual stress measurements have been done after cold expansion and after various loading conditions. Results were obtained from the FE simulation for radial and tangential residual stress through the thickness of the plate as a function of the radial position. This investigation conclusively show that a significant fatigue life extension can be obtained from a hole that is reworked using a split sleeve cold expansion after a period of constant amplitude or flight spectrum loading. The degree of improvement increases if the hole was also cold expanded during the expansion.

Engineering,Materials Science