Abstract:The fatigue behaviour of aerospace structural components is dominated by the time to grow from a small sub mm size flaw to a flaw of the order of a few mm. As such crack growth is dominated by the Region I growth of short cracks. Consequently management of the fleet requires that Region I short crack growth be both understood and predicted. Recent studies at the NASA Johnson Space Center have shown that the current ASTM testing standards can produce Region I da/dN versus K data that are a function of the test geometry and, as result, that similitude was not valid in Region I. As a result the NASA Johnson Space Center has abandoned these standards. Similar conclusions follow from recent Australian studies into cracking in 7050-T7451 aluminium alloy under variable amplitude loading. This research particularly focuses on the near threshold crack growth behaviour in 7050-T7451 aluminium Alloy, which is widely used in F/A-18 Hornet, the Super Hornet and the Joint Strike Fighter (F35). In order to understand the short crack growth behaviour, a fatigue test program in 7050-T7451 Aluminium Alloy specimens under repeated block loading was performed. The results show that the short crack growth rate (da/dN) versus K anomaly is due to forcing a relationship between them. It is also shown that this anomaly vanishes if crack growth is expressed using the Generalized Frost-Dugdale crack growth equation or the Hartman-Shijve crack growth equation. In order to investigate the effect of the stress concentration factor (Kt) on the crack growth rate, the growth of fatigue cracks from etched pits and machinery defects at a fastener hole under an operation RAAF load spectrum was analysed. The results of this study show that the Hartman-Schijve equation can be used to predict DSTO short crack growth tests data for both low and high Kt specimens. Crack growth under a representative combat and transport load spectrum was also studied. The characteristic stress intensity factor range Krms and the Effective Block Approach for analysing fatigue crack growth was conducted. Here it was found that the Krms effective block approach is a valid method for predicting crack growth under F-15 Eagle fighter aircraft and military transport spectra. The use of the fractal based crack growth equation was also evaluated. In this content it was found that fracture surfaces associated with the growth of cracks from small near micron initial defects can be treated as a fractal set and that crack growth conforms to a fractal crack growth equation. From this research, the growth of fatigue cracks from small pits, typically less than 20m, to long cracks, can be represented by the Generalized Frost-Dugdale crack growth equation and the Hartman-Schijve crack growth equation.

A fractographic study of fatigue crack growth from a cold expanded fastener hole at an engineering "crack initiation" scale

Residual Stress Measurement and Fatigue Crack Growth Prediction after Cold Expansion of Cracked Fastener Holes

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

The Effects of Fatigue Cracks on Fastener Loads during Cyclic Loading and on the Stresses Used for Crack Growth Analysis in Classical Linear Elastic Fracture Mechanics Approaches

An analysis of fatigue crack features at various crack lengths through mating fracture surface pairs

Fatigue Crack Growth in the Threshold Region

Cold Hole Expansion Process for Stress Analysis and Evaluation of Fatigue Properties

Utilizing Spatial Statistical Bounds on Residual Stress Fields From Cold Expansion: Effects on Fatigue Crack Growth Behavior

Microstructurally small fatigue crack growth rates in aluminium alloys for developing improved predictive models

Fatigue analysis of 7075-T6 aluminum alloy under high compressive residual stresses by considering the non-propagating crack region

Investigation on fatigue failure of split-sleeve cold expansion holes of 7075-T651 aluminum alloy

Characterization of Surface Fatigue Crack Nucleation and Microstructurally Small Crack Growth in High Strength Aluminum Alloys

Computational Monitoring of an Initial Fatigue Crack Incubation and Growth in a Smooth Specimen

Effect of cold expansion on the fatigue life of multi-hole 7075-T6 aluminum alloy structures under the pre-corrosion condition

An In Situ Study of Short Crack Initiation and Propagation During Fatigue Testing of a Hot Isostatically Pressed Al-7%Si-0.5%Mg (A357-T6) Alloy Specimen

Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses

Effects of Expanded and Non-Expanded Hole on the Delay of Arresting Crack Propagation for Aluminum Alloys

Fatigue Crack Growth Rates and Crack Tip Opening Loads in CT Specimens Made of SDSS and Manufactured Using WAAM

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Fracture Mechanics Analysis of Fatigue Failures in Crankshafts With Drilled Holes and Surface Compression

Quantitative Assessment of Microstructural Damage for Interior Crack Initiation and High Cycle Fatigue Life Modeling