Abstract:Hole cold expansion is an effective anti-fatigue manufacturing technology, which is widely used in hole strengthening of aviation components. In this paper, a novel small-deep hole (with the diameter less than 2 mm and the depth greater than 10 mm) cold expansion process, called the multi-spherical bump rotating cold expansion process (MBR-CEP), was proposed and verified by experiments on the Inconel 718 superalloy. The MBR-CEP tool with multi-spherical bumps produced by the laser texturing process (LTP) was first designed, and the MBR-CEP with different expansion degrees (δ = 2.1%, 2.6%, and 3.1%) was conducted on small-deep hole specimens. The surface integrity of the small-deep holes before and after the MBR-CEP in the inlet, middle, and outlet areas was studied. Results showed that compared with the small-deep hole after reaming, the hole treated by the MBR-CEP with different δ formed a plastic deformation layer with a maximum depth of 32.73–85.54 μm, a minimum surface roughness of 0.115–0.138 μm in Ra, and a compressive residual stress (CRS) layer with a depth of 0.39–1.077 mm. In addition, the CRS increased by up to 84%, and the microhardness increased by up to 13%. The microstructure evolution on the top surface and sub-surface of the small-deep hole wall was observed by transmission electron microscopy (TEM), which showed that nanocrystals with the size of 48–90 nm and a large number of dislocations and deformation twins formed. Finally, the effectiveness of the proposed process was verified by fatigue tests with different δ at 400 °C. The average fatigue life increased by 3.66 and 8.05 times under δ = 2.1% and 2.6%, respectively. The fatigue fracture surface was examined with scanning electron microscopy (SEM), which revealed that low surface roughness and existence of a plastic deformation layer could effectively reduce the probability of crack initiation.

A novel cold expansion process for improving the surface integrity and fatigue life of small-deep holes in Inconel 718 superalloys

High-temperature fatigue life improvement of small-deep holes by using a novel cold expansion process in a nickel-based superalloy

Design of a Novel Cold Expansion Tool for Deep Small Holes Based on FEM Simulations and Experimental Study

A novel hole cold-expansion method and its effect on surface integrity of nickel-based superalloy

Data-driven Fatigue Life Prediction of Small-Deep Holes in a Nickel-Based Superalloy after a Cold Expansion Process

Improving the fatigue property of diffusive film cooling holes in nickel-based single crystal superalloy via ultrashort pulse laser drilling coupled with abrasive flow machining

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing

Cold Hole Expansion Process for Stress Analysis and Evaluation of Fatigue Properties

Process-performance-prediction integration for fatigue life improvement technologies: an implementation in cold expansion of hole structures

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Study on the Residual Stress Distribution of Bi-Directional Cold Expansion Process Performed on Open Holes

Effect of split-sleeve cold hole expansion on the fatigue performance of an additive manufactured TC18 alloy

Effect of Cold Expansion on Room-Temperature Low Cycle Fatigue Life of GH4169 Superalloy with Hole Structure

The Synergistic Effect of Gradient Nanostructure and Residual Stress Induced by Expansion Deformation on the Tension-Tension Fatigue Performance of Ti6Al4V Holes

Effect of split sleeve cold expansion on microstructure and fatigue performance of 7075-T6 aluminum alloy holes

Effect of cold expansion on high-temperature low-cycle fatigue performance of the nickel-based superalloy hole structure

Improving the fatigue performance of AZ31 sheet with hole via electromagnetic cold expansion process

Improving fatigue properties of normal direction ultrasonic vibration assisted face grinding Inconel 718 by regulating machined surface integrity

Tailored microstructure by using in-situ re-scanning and its influence on fatigue crack growth behavior of Inconel 718 fabricated by LPBF at elevated temperature

Experimental Study on the Effect of Reaming on the Fatigue Life of Split-Sleeve Cold-Expanded Ti-6Al-4V Alloy Components

Fatigue performance improvement of laser shock peened hole on powder metallurgy Ni-based superalloy labyrinth disc