Abstract:The following study presents the results of research in the field of the performance of geopolymers consisting of Class F fly ash with an alkaline activator solution consisting only of sodium metasilicate (Na2SiO3) and water. The performances of this geopolymer are compared to the those of American Petroleum Institute (API) Class G cement. This comparison is to evaluate the potential of the geopolymer as an alternative to cement in cementing hydrocarbon wells in the oil and gas industry. The gap in the research is determining the performance properties that restrict the use of fly ash in the oil and gas industry. Using only sodium metasilicate as an activator with water, the solution creates a strong binding gel for the geopolymer and activates the aluminosilicate properties of the fly ash. This geopolymer is compared with Class G cement without additives to determine their base performances in high pressure and high temperature conditions, as well as note any properties that are affected in the process. This commences by formulating recipes of these two materials from workable ratios and concentrations. The ratios are narrowed down to the best working models to proceed to comparative performance testing. The tests included exploring their vital performances in fluid loss and thickening time. The results produced suggest that Class G cement generally has less fluid loss at low temperature than the geopolymer but could not maintain its integrity and structure as temperatures increased. Class G cement exhibited stability, consistencies of 100 Bcs (Bearden Consistency Units), and a faster thickening time of 1 h and 48 min when placed under high temperature and high-pressure conditions, respectively. However, the geopolymer showed more consistency regarding fluid loss with respect to rising pressure and temperature, and smoother, less fractured samples emerging from both tests. Though the geopolymer showed stronger performances in thickening and water retention, the experiments showed that it is not a uniform and consistent material like Class G cement. Through the use of different additives and intricate design, the sample may show success, but may prove more difficult and complex to apply than the industry standard and uniform content of Class G cement.

The Effect of Oil Additives on the Properties of Fly Ash-Based Foamed Geopolymers

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash

Effects of olive oil on physical and mechanical properties of ceramic waste-based geopolymer foam

Applicability of waste foundry sand stabilization by fly ash geopolymer under ambient curing conditions

Influence of Liquid-to-Solid and Alkaline Activator (Sodium Silicate to Sodium Hydroxide) Ratios on Fresh and Hardened Properties of Alkali-Activated Palm Oil Fuel Ash Geopolymer

The Influence of the Addition of Basalt Powder on the Properties of Foamed Geopolymers

Evaluating the Performance of Class F Fly Ash Compared to Class G Cement for Hydrocarbon Wells Cementing: An Experimental Investigation

The Different Properties of Geopolymer Composites Reinforced with Flax Fibers and Carbon Fibers

The Influence of Diatomite Addition on the Properties of Geopolymers Based on Fly Ash and Metakaolin

Green transformation of oily sludge through geopolymer: Material properties and hydration mechanisms

Fresh and Hardened Properties of One-Part Fly Ash-Based Geopolymer Binders Cured at Room Temperature: Effect of Slag and Alkali Activators

Effect of Waste Glass Powder and Bamboo Fiber on the Physico-Mechanical Properties and High-Temperature Behavior of a Fly Ash-Based Geopolymer

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Influence of the PVA Fibers and SiO2 NPs on the Structural Properties of Fly Ash Based Sustainable Geopolymer

Development of Foamed Geopolymer with Addition of Municipal Solid Waste Incineration Fly Ash

POROUS FLY ASH-BASED GEOPOLYMER USABLE AS AN UNCONVENTIONAL CONSTRUCTION MATERIAL

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Effect of olive waste ash on the properties of high‐strength geopolymer concrete

Physico-chemical properties and durability of a fly-ash-based geopolymer