Abstract:Geopolymers are binder materials that are produced by a chemical reaction between silica or aluminum compounds with an alkaline activating solution. Foamed geopolymer materials are increasingly being cited as a viable alternative to popular organic insulation materials. Since the foaming process of geopolymers is difficult to control, and any achievements in improving the performance of such materials are extremely beneficial, this paper presents the effect of the addition of basalt powder on the properties of foamed geopolymers. This paper presents the results of physicochemical studies of fly ash and basalt, as well as mechanical properties, thermal properties, and structure analysis of the finished foams. The scope of the tests included density tests, compressive strength tests, tests of the thermal conductivity coefficient using a plating apparatus, as well as microstructure tests through observations using light and scanning microscopy. Ground basalt was introduced in amounts ranging from 0 to 20% by mass. It was observed that the addition of basalt powder contributes to a reduction in and spheroidization of pores, which directly affect the density and pore morphology of the materials tested. The highest density of 357.3 kg/m3 was characterized by samples with a 5 wt.% basalt powder addition. Their density was 14% higher than the reference sample without basalt powder addition. Samples with 20 wt.% basalt addition had the lowest density, and the density averaged 307.4 kg/m3. Additionally, for the sample containing 5 wt.% basalt powder, the compressive strength exceeded 1.4 MPa, and the thermal conductivity coefficient was 0.1108 W/m × K. The effect of basalt powder in geopolymer foams can vary depending on many factors, such as its chemical composition, grain size, content, and physical properties. The addition of basalt above 10% causes a decrease in the significant properties of the geopolymer.

What problem does this paper attempt to address?

The paper attempts to address the issue of improving the performance of foamed geopolymer by adding basalt powder. Specifically, the study investigates the effects of different proportions of basalt powder on the density, thermal conductivity, compressive strength, and microstructure of foamed geopolymer. Since the foaming process of geopolymers is difficult to control, any method that enhances the performance of these materials is of significant importance. The main objectives of the paper include: 1. **Evaluating the impact of basalt powder on the performance of foamed geopolymer**: The study examines the effects of different proportions of basalt powder on foamed geopolymer through physicochemical tests, mechanical performance tests, thermal performance tests, and microstructure analysis. 2. **Determining the optimal addition ratio**: Identifying the optimal addition ratio of basalt powder to optimize the performance of foamed geopolymer. 3. **Exploring new application possibilities**: By improving the performance of foamed geopolymer, expanding its application range in the construction and industrial fields, especially in the application of lightweight thermal insulation materials. Through these studies, the authors hope to provide new knowledge and innovative ideas for the development of geopolymer materials.

The Influence of the Addition of Basalt Powder on the Properties of Foamed Geopolymers