Abstract:The following study presents the results of research in the field of the performance of geopolymers consisting of Class F fly ash with an alkaline activator solution consisting only of sodium metasilicate (Na2SiO3) and water. The performances of this geopolymer are compared to the those of American Petroleum Institute (API) Class G cement. This comparison is to evaluate the potential of the geopolymer as an alternative to cement in cementing hydrocarbon wells in the oil and gas industry. The gap in the research is determining the performance properties that restrict the use of fly ash in the oil and gas industry. Using only sodium metasilicate as an activator with water, the solution creates a strong binding gel for the geopolymer and activates the aluminosilicate properties of the fly ash. This geopolymer is compared with Class G cement without additives to determine their base performances in high pressure and high temperature conditions, as well as note any properties that are affected in the process. This commences by formulating recipes of these two materials from workable ratios and concentrations. The ratios are narrowed down to the best working models to proceed to comparative performance testing. The tests included exploring their vital performances in fluid loss and thickening time. The results produced suggest that Class G cement generally has less fluid loss at low temperature than the geopolymer but could not maintain its integrity and structure as temperatures increased. Class G cement exhibited stability, consistencies of 100 Bcs (Bearden Consistency Units), and a faster thickening time of 1 h and 48 min when placed under high temperature and high-pressure conditions, respectively. However, the geopolymer showed more consistency regarding fluid loss with respect to rising pressure and temperature, and smoother, less fractured samples emerging from both tests. Though the geopolymer showed stronger performances in thickening and water retention, the experiments showed that it is not a uniform and consistent material like Class G cement. Through the use of different additives and intricate design, the sample may show success, but may prove more difficult and complex to apply than the industry standard and uniform content of Class G cement.

Evaluating the Performance of Class F Fly Ash Compared to Class G Cement for Hydrocarbon Wells Cementing: An Experimental Investigation

Physico-chemical properties and durability of a fly-ash-based geopolymer

Perlite incorporation for sedimentation reduction and improved properties of high-density geopolymer cement for oil well cementing

Strength Performance of Soft Clayey soil Solidified by Slag- Fly Ash – Metakaolin Based Geopolymer

Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties

Fresh and Hardened Properties of One-Part Fly Ash-Based Geopolymer Binders Cured at Room Temperature: Effect of Slag and Alkali Activators

Mechanical Properties of Geopolymers Synthesized from Fly Ash and Red Mud under Ambient Conditions

Experimental study on performances of fly ash-based geopolymer cementitious material with low admixtures content

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Residual water and interfacial bonding effects on the mechanical performance of CNT/fly ash geopolymer binder

Water-Extended Low-Density Granite-Based Geopolymer for Low-Temperature Well Cementing Applications: The Impact of Precursor Selection and Particle-Size Distribution

Workability and Compressive Strength Properties of (Fly Ash-Metakaolin) based Flowable Geopolymer Mortar

Geotechnical Behaviour of Gypseous Soil Treated by Geopolymer Additives

Effects of Relative Humidity on the Properties of Fly Ash-Based Geopolymers

Evaluation of Properties of Concrete Without Cement Produced Using Fly Ash‐Based Geopolymer

Stabilization of expansive soil using flyash based geopolymer

Performances of Using Geopolymers Made with Various Stabilizers for Deep Mixing

Applicability of waste foundry sand stabilization by fly ash geopolymer under ambient curing conditions

Comparison Between Geopolymer Reaction and Cement Hydration in Solidification of Fly Ash Generated in Municipal Solid Waste Incineration

The influence of fly ash-based geopolymer on the mechanical properties of OPC-solidified soil