Abstract:The construction industry, integral to national infrastructure development, faces environmental challenges attributed to Portland cement's high energy consumption and carbon dioxide emissions during production. To address this challenge, this study integrated waste fly ash and polystyrene into geopolymers to enhance environmental sustainability and economic feasibility. The objectives included developing low-density geopolymers using polystyrene inclusion, optimizing component mixing ratios, assessing activator concentration effects, determining the optimal curing conditions, and characterizing the resulting geopolymers. Through experimental investigation, low-density geopolymers were developed with optimized component ratios and curing conditions. The experimental procedure began with the classification of fly ash to determine its suitability for various applications, revealing it to be type F. Geopolymers were fabricated using a mixture of fly ash, water, sodium hydroxide activator, and polystyrene. Varied concentrations of sodium hydroxide and polystyrene were employed. Two curing temperatures, 60 °C and 100 °C, were explored. The results showed that greater sodium hydroxide concentrations improved the structure and compressive strength of the geopolymers. The results also demonstrated a significant correlation between the curing conditions and the mechanical properties of the produced geopolymers. The goal of reducing the density of the geopolymers for lightweight thermal-resistant applications was achieved through polystyrene incorporation. However, polystyrene incorporation negatively impacted the compressive strength. The optimum production conditions for the sodium hydroxide-varied samples were 8 g sodium hydroxide/g sample cured at 100 °C, while the optimum production conditions for polystyrene-varied samples were 1 g polystyrene/g sample cured at 60 °C. The findings confirmed the viability of utilizing fly ash and polystyrene wastes to produce sustainable, low-density, thermal-resistant construction materials. Overall, increasing activator concentration enhances the strength and durability of geopolymers, while polystyrene contributes to the development of lightweight geopolymers, provided the appropriate amount is utilized. To ensure replicability, the formulation procedure and input quantities must be tailored according to the intended geopolymer application. These insights offer practical guidance for optimizing geopolymer manufacturing processes towards enhanced sustainability and performance.

Applicability of waste foundry sand stabilization by fly ash geopolymer under ambient curing conditions

Chemical stabilization of demolition wastes in pavement bases using one–part fly ash and slag based geopolymers

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Utilization of Fly Ash to Enhance Ground Waste Concrete-Based Geopolymer

Efficient utilization of waste drilling mud to prepare material stabilized with fly ash/slag based geopolymer for subgrade engineering

Waste Valorization: Sustainable Geopolymer Production Using Recycled Glass and Fly Ash at Ambient Temperature

Study on Mechanical Properties and Microstructure of Fly-Ash-Based Geopolymer Solidified Waste Mud

Synthesis and characterization of synthetic sand by geopolymerization of industrial wastes (fly ash and GGBS) replacing the natural river sand

Mechanical, durability properties, and environmental assessment of geopolymer mortars containing waste foundry sand

Experimental Study on Fabrication of Environment-Friendly Concrete by Solidifying Aeolian Sand and Natural Gravel with Fly Ash-Based Geopolymer

Synthesis of High Strength Ambient Cured Geopolymer Composite by Using Low Calcium Fly Ash

Development of a Low-Density Waste-Based Geopolymer Construction Material

Strength Assessment of Spent Coffee Grounds-Geopolymer Cement Utilizing Slag and Fly Ash Precursors

Compressive strength of fly ash based geopolymer utilizing waste completely decomposed granite

Mechanical Property and Microstructure Characteristics of Geopolymer Stabilized Aggregate Base

The effect of different types of class F fly ashes on the mechanical properties of geopolymers cured at ambient environment

Lead-Zinc Mine Tailings Valorization Through Fly Ash-Based Geopolymer for Building Material: Synthesis, Microstructure, and Mechanical Properties

Fresh and Hardened Properties of One-Part Fly Ash-Based Geopolymer Binders Cured at Room Temperature: Effect of Slag and Alkali Activators

Effect of Fly Ash and Cement on the Engineering Characteristic of Stabilized Subgrade Soil: an Experimental Study

Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes

Stabilization of expansive soil using flyash based geopolymer