Abstract:The recycling of lithium iron phosphate power batteries that have exploded in retirement is urgent, but the focus and difficulty of the recycling is the effective recovery of lithium and iron elements in the cathode active material. In this study, the cathode sheets and other components of the lithium-ion batteries were obtained by pretreatment, and the cathode active material and the Al foil of the collector were recovered by stirring with dilute alkali solution (optimized conditions of alkali solution concentration 0.075 mol L-1, liquid-solid ratio 20 mL g(-1), and stirring time 40 min). The H2SO4-H2O2 system was used to leach used lithium iron phosphate cathode powder, the leaching process conditions were optimized and the leaching mechanism was revealed. The leaching rates of Li and Fe elements reached 98.79 % and 94.97 %, respectively, at a H2SO4 concentration of 2.5 mol L-1, a H2O2 dosage of 6 mL, a liquid-solid ratio of 25 mL g(-1), a leaching temperature of 60 degrees C and a leaching time of 60 min. The pH value was precisely adjusted in the chemical precipitation method to recover lithium and iron elements from cathode active material. The recovered products FePO4 and Li2CO3 were used as the precursors for the regeneration of LiFePO4 cathode material. The electrochemical performance of LiFePO4/C materials regenerated at 700 degrees C from the raw material with a lithium to iron molar ratio of 1.03:1 was relatively good, with a first discharge specific capacity of 160.1 mAh g(-1) at 0.1 C, and a charge/discharge efficiency of 96.70 % for the first cycle. The good electrochemical performance was still maintained at a higher rate, with a capacity retention of 99.7 % after 100 cycles at 1 C.

Preparation method of iron phosphate lithium electrode

Preparation method of carbon-coated lithium iron phosphate with grade structure

A lithium ion battery positive electrode material for lithium phosphate and iron preparation

Preparation method for low-temperature nanometer lithium iron phosphate cathode material

Wet-process phosphoric acid for preparation of iron phosphate and its influence on performance of lithium iron phosphate synthesis

A high performance lithium ion battery positive electrode material of a lithium iron manganese phosphate and preparation method

Lithium iron phosphate structure and a method of preparing a lithium ion battery, and

Modification method for improving high-temperature cycle performance and ionic conductance of lithium iron phosphate material

A novel environment-friendly synthesis of high purity micron iron phosphate and its application as a precursor of lithium iron phosphate

Preparation of high purity iron phosphate based on the advanced liquid-phase precipitation method and its enhanced properties

Preparation method of positive electrode material for lithium-ion battery capable of improving electrochemical properties

Industrial synthesis and improved process for lithium iron phosphate

Electrophoretic Lithium Iron Phosphate/reduced Graphene Oxide Composite for Lithium Ion Battery Cathode Application

Preparation of Iron Phosphate Battery Materials from Industrial Ferrous Sulfate Waste by Liquid Phase Method

Carbon coated lithium manganese phosphate/lithium iron phosphate core-shell structure material as well as preparation method thereof

Process for the preparation of lithium iron phosphate as a cathode active material for lithium ion secondary batteries

An Aqueous Binder for High-Areal-Capacity Fe3O4-Based Anodes in Lithium-Ion Batteries

Research on Preparation of Nano-porous Lithium Iron Phosphate for Lithium-ion Battery Electrode Materials

Preparation method of high-nickel, low-cobalt and low-manganese ternary positive electrode material precursor for lithium battery

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Method for preparing lithium iron phosphate by sintering lithium iron phosphate precursor and microwave sintering equipment