Abstract:The recycling of lithium iron phosphate power batteries that have exploded in retirement is urgent, but the focus and difficulty of the recycling is the effective recovery of lithium and iron elements in the cathode active material. In this study, the cathode sheets and other components of the lithium-ion batteries were obtained by pretreatment, and the cathode active material and the Al foil of the collector were recovered by stirring with dilute alkali solution (optimized conditions of alkali solution concentration 0.075 mol L-1, liquid-solid ratio 20 mL g(-1), and stirring time 40 min). The H2SO4-H2O2 system was used to leach used lithium iron phosphate cathode powder, the leaching process conditions were optimized and the leaching mechanism was revealed. The leaching rates of Li and Fe elements reached 98.79 % and 94.97 %, respectively, at a H2SO4 concentration of 2.5 mol L-1, a H2O2 dosage of 6 mL, a liquid-solid ratio of 25 mL g(-1), a leaching temperature of 60 degrees C and a leaching time of 60 min. The pH value was precisely adjusted in the chemical precipitation method to recover lithium and iron elements from cathode active material. The recovered products FePO4 and Li2CO3 were used as the precursors for the regeneration of LiFePO4 cathode material. The electrochemical performance of LiFePO4/C materials regenerated at 700 degrees C from the raw material with a lithium to iron molar ratio of 1.03:1 was relatively good, with a first discharge specific capacity of 160.1 mAh g(-1) at 0.1 C, and a charge/discharge efficiency of 96.70 % for the first cycle. The good electrochemical performance was still maintained at a higher rate, with a capacity retention of 99.7 % after 100 cycles at 1 C.

Industrial synthesis and improved process for lithium iron phosphate

The Progress and Future Prospects of Lithium Iron Phosphate Cathode Materials

Improvement of electrochemical properties of LiFePO4 anode Material

Wet-process phosphoric acid for preparation of iron phosphate and its influence on performance of lithium iron phosphate synthesis

The synthesis and modification of LiFePO4 lithium-ion battery cathodes: a mini review

An overview on the life cycle of lithium iron phosphate: synthesis, modification, application, and recycling

A novel environment-friendly synthesis of high purity micron iron phosphate and its application as a precursor of lithium iron phosphate

Study on selective recovery of lithium ions from lithium iron phosphate powder by electrochemical method

Electrochemical selective lithium extraction and regeneration of spent lithium iron phosphate

Research progress of lithium manganese iron phosphate cathode materials: from preparation to modification

Rational Design of Atomic‐Layer‐Deposited LiFePO4 As a High‐Performance Cathode for Lithium‐Ion Batteries

Constructing an Inorganic/organic Mixed Protective Film for Low-Cost Fabrication of Stable Lithium Metal Anode

Research Progress and Optimization Strategies of Cathodes, Anodes and Electrolytes for Lithium-ion Batteries

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Recent progress of advanced anode materials of lithium-ion batteries

The industrialization of lithium sulfide nano-powder material

A Scalable and Controllable Li‐powder‐coating Pre‐lithiation Method toward Ultra‐long‐life and High‐energy‐density LiFePO4 Battery

Transforming Materials into Practical Automotive Lithium‐Ion Batteries

Research progress of alkaline earth metal iron-based oxides as anodes for lithium-ion batteries

Modification method for improving high-temperature cycle performance and ionic conductance of lithium iron phosphate material

Progress of Li4Ti5O12 anode material for lithium ion batteries